NordCap Storage tank R 190 (243 kg) for ice makers, incl. cover kit CBT30EFSD, stainless steel 1.4509

Product details

The NordCap storage tank R 190 (243 kg) stores the ice of the ice-making series SVD, SP and SNM in an insulated stainless steel housing with vertically detectable draw cap.

The NordCap storage tank R 190 (243 kg) is designed for the combination with the ice making series SVD, SP and SNM and serves for the storage of the produced ice in a separate, isolated container. With external dimensions of 768 x 866 x 1274 mm (W x D x H) it is adapted to the aforementioned ice making series. The scope of delivery includes the matching cover kit CBT30EFSD, so that the container can be combined with the respective ice maker.

For the removal of the ice, the container has an insulated drawer lid with a surrounding frame seal and hinges made of stainless steel. The lid can be determined vertically and thus remains open during the ice removal. Inside, a guide plate made of stainless steel is installed, for the drain a flexible drain pipe ensures.

The outer panel is made of stainless steel 1.4509. The inner container is made of polyethylene with AGION® antibacteria coating and is deep drawn in a pcs, which means that no joints are created in the interior and the surfaces can be cleaned well. An insulation made of PUR hard foam with a thickness of up to 40 mm encloses the inner container and keeps the pre-filled ice cold.

The storage container works without electronic components and therefore does not need its own electrical connection. The net weight is 55 kg, the gross weight is 70 kg, the container is manufactured in Italy. It is supplied as standard with four feet. The installation shall include a wall spacing of at least 152 mm on the construction side, which shall apply to the entire combination of containers and ice makers at their later location.

• 1 x storage tank R 190 (243 kg)
• 1 x CBT30EFSD cover kit
• 4 x feet

• Manufacturer item number: 413190190103
• Suitable: for combination with the SVD, SP and SNM series of ice making machines
• External dimensions (W x D x H): 768 x 866 x 1274 mm
• Cap: insulated, frame seal, stainless steel hinges, vertically detectable
• Equipment: stainless steel sheet, flexible drain pipe
• Outside facing: stainless steel 1.4509
• Inner container: Polyethylene with AGION® antibacteria coating, deep drawn in a pcs
• Insulation: PUR hard foam, up to 40 mm
• Electrics: no electronic components
• Weight: 55 kg net (70 kg gross)
• Country of origin: Italy

• Can be combined with the SVD, SP and SNM series of ice making machines
• Insulated drawer cover with frame seal, vertically detectable
• Stainless steel hinges and stainless steel sheet
• Inner container in a pcs deep drawn with AGION® Antibacteria coating
• PUR hard foam insulation up to 40 mm
• Cover kit CBT30EFSD included
• Without electronic components, no electrical connection required

Notes on establishment and operation

The installation of the apparatus shall be accompanied by a wall spacing of at least 152 mm.

Energy labelling

Storage containers for ice makers are currently not subject to EU energy label marking requirements (no EPREL registration), as the product does not contain electronic components.

Product safety (GPSR)

Manufacturer: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.