NordCap Storage tank R 190 (243 kg) for ice makers SVD, SP and SNM, stainless steel, insulated drawer cover

Product details

The NordCap storage tank R 190 (243 kg) is designed for combination with the ice-making series SVD, SP and SNM and has an insulated, vertically detectable draw cap.

The storage tank R 190 (243 kg) is designed as an addition to the NordCap series SVD, SP and SNM and absorbs the ice produced by these devices. The container can also be used without a cover kit. The outer dimensions are 768 x 866 x 1274 mm (W x D x H), with open flap the depth is 1157 mm. The container is mounted on four feet, which are part of the standard accessories. In the installation, a wall distance of at least 152 mm must be planned on the construction side.

For the removal of the ice, an insulated drawer lid with surrounding frame seal is available. The lid is attached to stainless steel hinges and can be determined in vertical position, so that it remains open during the removal. Further equipment includes a stainless steel sheet and a flexible drain pipe.

The outer lining is made of stainless steel 1.4509. The inner container is deep drawn in a pcs of polyethylene and is equipped with the AGION® Antibacteria coating. The container is insulated with PUR hard foam in a thickness of up to 40 mm.

The storage container is designed without electronic components and is therefore not subject to EPREL marking requirements. The net weight is 55 kg, the gross weight is 70 kg, Italy is indicated as the country of origin. The type designation R 190 (243 kg) assigns the container within the NordCap reservoirs for the ice-making series SVD, SP and SNM.

• 1 x storage tank R 190 (243 kg)
• 4 x feet

• Manufacturer item number: 413190190
• Suitable: for combination with the SVD, SP and SNM series of ice making machines
• External dimensions (W x D x H): 768 x 866 x 1274 mm
• Depth with open flap: 1157 mm
• Cover kit: not required (can be used without cover kit)
• Cap: insulated, frame seal, stainless steel hinges, vertically detectable
• Equipment: stainless steel sheet, flexible drain pipe
• Insulation: PUR hard foam, up to 40 mm
• Outside facing: stainless steel 1.4509
• Inner container: Polyethylene, AGION® Antibacteria coating, deep drawn in a pcs
• Electronic components: none
• Weight: 55 kg net
• Country of origin: Italy

• For the SVD, SP and SNM series of ice making machines
• Insulated drawer cover with frame seal, vertically detectable
• Stainless steel hinges and stainless steel sheet
• Inner container with AGION® antibacteria coating, deep drawn in a pcs
• PUR hard foam insulation up to 40 mm
• Flexible drain pipe
• Can be used without cover kit

Notes on establishment and operation

The installation of the equipment requires a wall spacing of at least 152 mm. The storage tank is intended for combination with the SVD, SP and SNM series ice makers, the ice maker is not included.

Energy labelling

This storage container is designed without electronic components and is not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.