NordCap Ice cube maker SDH 50 L, hollow cubes up to 50 kg/24 h, 17 kg storage container, air-cooled

Product details

The NordCap ice cube maker SDH 50 L produces up to 50 kg of hollow cubes in 24 hours and stores them in the integrated 17 kg storage container.

The SDH 50 L is an ice cube maker for the production of hollow cubes, which are especially suitable for chilled juices and soft drinks. The unit produces up to 50 kg of ice in 24 hours, a single cube measures approx. 35 x 29 x 36 mm and weighs around 21 grams. The finished cubes fall into the integrated storage container, which absorbs 17 kg or about 810 ice cubes. The stand unit has external dimensions of 485 x 575 x 810 mm (W x D x H).

Ice production works with a positive spraying system and a fully automatic production control system. The defrosting is done automatically with hot gas and fresh water. All water-bearing parts are made of food-safe materials, a cleaning system is available as standard. The machine is air-cooled and works with the natural refrigerant R-290 (propane) with a filling quantity of 115 g.

The housing is made of stainless steel 1.4509 with rounded edge protection, the inner container is deep drawn in a pcs made of polyethylene. For the care the air filter can be washed out, dirt-prone components can be removed from the front. Drain nozzles are already pre-installed, and the scope of delivery includes drain and connection hose, an ice shovel and four feet with 89 mm height.

The ice cube maker is plug-in for 230 V with a connection value of 0.32 kW and a protection of 10.0 A, the energy consumption is 6.20 kWh in 24 hours. It is designed for operation up to 43 °C ambient temperature, the actual production volume depends on ambient and water inflow temperature. For operation, a water supply with 5 to 38 °C and 1 to 5 bar as well as a water flow are required. Optionally available is the desalination plant Fresh Maxi for partial desalination up to 5,600 l with silver activated carbon for the supply of decarbonized water.

• 1 x ice cube maker SDH 50 L
• 1 x drain hose
• 1 x connection hose
• 1 x ice shovel
• 4 x feet, height 89 mm

• Manufacturer item number: 41330510163
• Ice shape: hollow cube, approx. 35 x 29 x 36 mm (W x D x H), approx. 21 g
• Production output: up to 50 kg / 24 h
• Storage tank: 17 kg (approx. 810 ice cubes), integrated
• External dimensions (W x D x H): 485 x 575 x 810 mm
• Installation type: Stand-up equipment
• Type of cooling (machine): air cooling
• Refrigerant: R-290 (propane), filling quantity 115 g
• Cleaning system: series
• Connection: plug ready, 0.32 kW, 230 V, 1-phase, 50 Hz
• Hedging: 10,0 A
• Energy consumption: 6.20 kWh / 24 h
• Water inflow: 5 to 38 °C, water pressure 1 to 5 bar
• Device operation up to 43 °C ambient temperature
• Outside facing: stainless steel 1.4509, rounded edge protection
• Inner container: polyethylene, deep drawn in a pcs
• Weight: 45 kg net
• Country of origin: Italy

• Hollow cubes, ideal for chilled juices and soft drinks
• Positive spray system with fully automatic production control
• Automatic defrosting with hot gas and fresh water
• Cleaning system as standard
• Washable air filter, dirt-prone components can be extended from the front
• Water guide parts of food-based materials

Notes on establishment and operation

The installation requires a wall spacing of at least 152 mm. On the construction side, a water inlet and a water drain are required. The amount of ice produced daily may vary depending on the water inlet temperature.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial ice makers are currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.