NordCap side foot panels (2 pcs) for series EVO 900, two-line line, 900 x 150 mm

Product details

The NordCap side foot panels in a set of 2 pcs measure 900 x 150 mm (W x H) and are intended for the two-line installation of EVO 900 series devices.

The side foot panels are part of the installation accessories of the NordCap series EVO 900. In the NordCap range they are classified as "Installation with shock strip EVO 900". According to the manufacturer, they are intended for the two-line installation, i.e. for cooking lines of the EVO 900 series, which are planned in two rows.

The dimensions indicate NordCap with 900 x 150 mm (W x H), each aperture is therefore 900 mm wide and 150 mm high. Based on these dimensions, the foot panels can be included in the planning of the two-line installation. Further dimensions or information about the material are not stored for this article.

The foot panel set is a pure installation part without electronic components. No electricity, gas or water connection is required, controls are not available. For this reason, the article is not subject to EPREL marking requirements, an energy label is not provided.

The country of origin is Italy. NordCap calls ZANUSSI PROFESSIONAL in Pordenone as the manufacturer in terms of product safety information. In the NordCap range, the side footports are listed under the manufacturer's product number 406206180, which makes it easier for you to clearly assign them when ordering. The designation "side footports (2 pcs)" corresponds to the manufacturer's specification.

• 2 x lateral foot cover, 900 x 150 mm (W x H)

• Manufacturer item number: 406206180
• Series: EVO 900
• Suitable: for two-line installation (installation with bumper)
• Dimensions (W x H): 900 x 150 mm
• Quantity: 2 pcs
• Electronic components: none
• Country of origin: Italy

• Installation accessories for the EVO 900 series
• For the two-line layout
• Set of 2 side foot panels
• 900 mm wide and 150 mm high each
• Without electronic components, no connection required

Notes on establishment and operation

The side foot panels are intended for the two-line installation of EVO 900 series devices.

Energy labelling

This product without electronic components is not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: ZANUSSI PROFESSIONAL, Viale Treviso 15, 33170 Pordenone, Italy (trade mark holder: stock bullage Electrolux, 105 45 Stockholm, Sweden)
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.