NordCap HHFF 40 E retractor safe for horden wagons 40 x GN 1/1 or plate hoard wagon, Climachef

Product details

The NordCap HHFF 40 E retractor hot storage cabinet accommodates complete hordes for 40 x GN 1/1 or plate hordes – with Climachef system, touch screen, core temperature sensor and USB interface as standard.

The HHFF 40 E is a stand for GN 2/1 or GN 1/1, insert lengthwise / crosswise, and is designed for use in large kitchens, hospital kitchens, factory canteens, production kitchens, banquet kitchens, catering companies and joint catering. It is tailored to large production volumes and complete GN wagons: Optionally, you can drive a horde car for 40 x GN 1/1 or a plate horde car for 126 plates into the interior. NordCap gives an output of 144 kg per cycle, working in the range from 30 to 120 °C. The inner dimensions are 780 x 965 x 1860 mm (W x D x H).

The cabinet is operated via an electronic control in the front panel with a multilingual 4.3-inch LED touch screen, main switch and start/stop button. Time, temperature and humidity can be controlled, the climachef system takes over the automatic humidity control. A start delay is possible, an acoustic signal sounds at the end of the cycle. As standard, a 1-point core temperature sensor and a USB interface are included for reading HACCP data.

The full door closes with a 3-point lock and a heat and aging resistant seal, it is opened by a rotary handle, the door stop is right and not changeable. In the cooking room a stainless steel shock guard is installed. The CNS 1.4301 interior has rounded corners and a flat stainless steel floor, the outside is covered with CHR 1.4016. The energy-saving insulation is up to 35 mm thick, the maintenance components are easily accessible.

Heating is provided via a circulating air heating system with autoreverse fan wheel operation and safety thermostat, an automatic humidity venting is available. For operation, a construction-side water connection with 1.5 to 5 bar water pressure is required. Connected to 400 V (3N, 50 Hz) with 7.80 kW and a protection of 11.3 A, the protection class IPX4 protects against splash water. Optionally available are a GN 2/1 horde car for 40 x GN-Blech 1/1-65, a plate-horde car for 126 plates with a diameter of 230 to 310 mm, suitable thermal ceilings for horde and plate-horde cars, a multipoint or needle core temperature sensor and an adjustable fan speed.

• 1 x HHFF 40 E retractor safe
• 1 x 1-point core temperature sensor
• 1 x USB interface for reading HACCP data

• Manufacturer item number: 437032040
• Installation type: Stand-up equipment
• Suitable: for GN 2/1 or GN 1/1, for mounting horde frames and plate mounts
• Recording (optional): 1 x horde car for 40 x GN 1/1, 1 x plate horde car for 126 x plate
• Power: 144 kg Product quantity per cycle
• Working temperature: 30 to 120 °C
• External dimensions (W x D x H): 1263 x 1179 x 1967 mm
• Internal dimensions (W x D x H): 780 x 965 x 1860 mm
• Depth with open door: 2119 mm
• Control: electronic (in front panel), LED display 4.3 inch, touch screen, multilingual
• Control: time, temperature, humidity; climachef system for automatic humidity control; start delay
• Heating: circulating air, autoreverse fan wheel operation, safety thermostat, automatic humidity ventilation
• Door: 1 x full door, 3-point lock, turn handle, right door stop, non-changeable
• Connection: 7,80 kW, 400 V, 3N, 50 Hz
• Hedging: 11,3 A
• Water connection: construction side, water pressure 1.5 to 5 bar
• Protection class: IPX4 (splashproof)
• Insulation: energy-saving insulation, up to 35 mm
• External facing: CHR 1.4016
• Internal facing: CNS 1.4301
• Weight: 230 kg net
• Country of origin: Italy

• Introductory model for hordes and plate hordes
• Climachef system for automatic humidity control
• 1-point core temperature sensor and USB interface for HACCP data as standard
• LED touch screen 4.3 inch, multilingual, start delay
• Air circulation with autoreverse fan wheel operation
• Flat stainless steel floor and stainless steel floor protection in the cooking room
• 144 kg product quantity per cycle

Notes on establishment and operation

Horde and plate horde trolleys are not included. For operation a water connection (1.5 to 5 bar) is required. The connection to 400 V three-phase current must be made by an electric specialist.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: Moduline S.R.L., Via dell' Industria 11, 31029 Vittorio Veneto (TV), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.