NordCap Cooling table CLM 650 2-7001 with 2 full doors for GN 1/1, -2 to 10 °C, 230 V

Product details

The NordCap cooling table CLM 650 2-7001 offers 2 full doors for GN 1/1 and is controlled by the CRIO SMART display control with HACCP control function and NFC app connection.

The CLM 650 2-7001 is a two-part cooling table for GN 1/1 gas standard containers with 2 full doors. With external dimensions of 1245 x 700 x 800 mm (W x D x H) and a body height of 650 mm, it provides 265 litres of gross capacity and 164 litres of net content directly at the workplace. The temperature range is -2 to 10 °C. The cooling table is supplied in the basic equipment without a worktop; it is sockelfähigkeit and can be under- and installed thanks to front-side ventilation. With optional worktop the overall height is 850 mm, with worktop and upstand 950 mm.

The device is controlled by the CRIO SMART display control with digital display, on/off switch, turbo-cooling cycle, HACCP control function and service alarm. Service and adjustment parameters can be controlled via an NFC via an app. An RS-485 interface is compatible with the Modbus and Carel communication protocols, and the device is prepared for real-time access, remote and data monitoring via IoT and Ethernet – this requires optional accessories such as the IoT extension module or an Ethernet connection set. In the interior are installed under the ceiling air deflectors.

Housing and interior are made of stainless steel CNS 1.4301, the rounded corners in the interior make cleaning easier. The full CNS doors are self-locking and non-permanent, with an opening at 95°, CNS handlebar and door stop on the left, sealed with a 3-chamber balloon seal that can be replaced without tools. The insulation made of cyclopentan hard foam with a thickness of up to 90 mm keeps the cold in the device, the protection class IP21 protects against drip water. The depth is 1098 mm when the door is open.

Cooled with circulating air and natural refrigerant R-290 (Propan, 50 g) at a cooling capacity of 358 W at -10 °C evaporation temperature. Defrosting is automatic and meets the requirements, the dew water is evaporated by hot gas; The evaporator is foamed, and the refrigeration machine can be pulled out completely for maintenance and cleaning. The unit is designed for climate class 5 (+40 °C ambient temperature, 40% relative humidity). The cooling table is plug-in for 230 V with a connection value of 0.22 kW, reaches the energy efficiency class A and consumes 400 kWh per year, the noise level is about 48 dB. An optional roller set with 4 rolls is available.

• 1 x cooling table CLM 650 2-7001 (basic equipment without countertop)
• 1 x support grating, grey rilsaniert, per door compartment
• 1 x support rails (2 pcs) per door compartment
• 2 x rail, vertical, for max. 15 support rails, per door compartment

• Manufacturer item number: 402721094
• Parts: 2 (2 full doors)
• Suitable: for GN 1/1
• Installation type: sub- and installation-capable, front-side ventilation and ventilation, socket-capable
• External dimensions (W x D x H): 1245 x 700 x 800 mm
• Body height: 650 mm
• Height with worktop (optional): 850 mm, with worktop and upstand: 950 mm
• Depth with open door: 1098 mm
• Gross content: 265 l, net content: 164 l
• Temperature range: -2 to 10 °C
• Climate class: 5 (+40 °C ambient temperature, 40% relative humidity)
• Relative humidity: 40 - 85 %
• Control: CRIO SMART display control
• Type of cooling: recirculated air cooling
• Refrigerant: R-290 (propane), GWP 3, filling quantity 50 g
• Cooling capacity: 358 W at -10 °C Evaporation temperature
• Connection: plug ready, 0.22 kW, 230 V, 1-phase, 50 Hz
• Energy consumption: 400 kWh/year
• Protection class: IP21 (water-protected)
• Sound level: approx. 48 dB
• Outside facing: CNS 1.4301
• Internal facing: CNS 1.4301
• Insulation: Cyclopentan hard foam, up to 90 mm
• Weight: 90 kg net
• Country of origin: Italy

• CRIO SMART display control with turbo-cooling cycle, HACCP control function and service alarm
• NFC app control for service and setting parameters
• RS-485 interface, compatible with Modbus and Carel
• Prepared for IoT and Ethernet remote monitoring (with optional accessories)
• Self-closing full doors with tool-free interchangeable 3-chamber balloon seal
• Under and mounted by front-side ventilation, socket-capable
• Refrigeration machine for maintenance and cleaning completely extractable

Notes on establishment and operation

The cooling table is supplied in the basic equipment without worktop; suitable worktops with upstand (50/100 mm) or all-sided edge (50 mm) are optionally available. Optional accessories are required for remote and data monitoring via IoT and Ethernet.

Operating instructions

Download user manual (PDF)

Energy labelling

Energy efficiency class: A
Energy consumption: 400 kWh/year
EPREL registration number: 424759
Legal basis: Regulation (EU) 2015/1094
Supplier according to EPREL: Alpeninox
Download energy label (PDF)

Product safety (GPSR)

Manufacturer: ALPENINOX, Viale Treviso 15, 33170 Pordenone, Italy (brand holder: Electrolux Professional S.p.A., Viale Treviso 15, 33170 Pordenone, Italy)
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.