NordCap Cooling table CLO 650 3-7031 with 1 door and 4 drawers 1/2 for GN 1/1, centrally cooled, 191 l

Product details

The NordCap cooling table CLO 650 3-7031 with one door and four CNS semi drawers with telescopic pulley for GN 1/1 is centrally cooled and is operated via the CRIO SMART display control with HACCP control function.

The CLO 650 3-7031 is a three-part cooling table for GN 1/1 gastro-standard containers and is equipped with a door and four CNS semi-drawers with telescopic pulley. With external dimensions of 1557 x 700 x 800 mm (W x D x H), a body height of 650 mm and a gross capacity of 191 litres, it offers cooled storage space directly at the workplace. The temperature range is -2 to 10 °C, the climate class 5 is designed for ambient temperatures up to +40 °C at 40 % relative humidity. The cooling table is supplied in the basic equipment without worktop, is socket-capable and can be installed and installed thanks to front-side ventilation.

The cooling table is controlled via the CRIO SMART display control with digital display, on/off switch and turbo-cooling cycle. A HACCP control function and a service alarm support monitoring during operation, service and adjustment parameters can be controlled via an NFC via an app. The equipment also includes an RS-485 interface, compatible with Modbus and Carel communication protocols. Optional accessories are required for real-time access via IoT and Ethernet for remote and data monitoring. The storage and storage area is a grey rilsanierte GN-Tragrost 1/1 and a tilt-proof, grey rilsanierte Stellage with 6 rails.

The housing and interior are made of stainless steel CNS 1.4301, the rounded corners in the interior make cleaning easier. The CNS door opens up to an open position at 95° and is equipped with a CNS grip strip and a 3-chamber balloon seal, which can be changed without tools. The CNS semi drawers run on telescopic trains and also have a 3-chamber balloon seal and a CNS grip strip. The insulation made of cyclopentan hard foam with a thickness of up to 90 mm keeps the cold in the device, the protection class IP21 protects against drip water. On the floor of the equipment, the position for an optional bore of the cleaning process is marked by a deep-drawn marking.

The cooling table is centrally cooled and designed for operation with a separate liquefaction set, an expansion valve for the refrigerant R-134a is pre-installed. The cooling capacity is 412 W at -10 °C evaporation temperature, and is cooled by air through a foamed evaporator. The defrosting is automatic and meets the requirements, on the construction side a dew water drain is required, alternatively an electric dew water evaporation tray is available as a special equipment. The electrical connection value is 0.03 kW at 230 V. Optionally available are an external cooling machine for cooling tables of the CLO 650 series with 2 or 3 compartments as well as worktops with upstand or all-sided bending.

• 1 x cooling table CLO 650 3-7031 (basic equipment without countertop)
• 1 x GN-tragrost 1/1, grey rilsanised
• 1 x Stellage with 6 rails, tilt-proof, grey rilsaniert

• Manufacturer item number: 402712647
• Parts: 3 (1 door, 4 drawers 1/2)
• Suitable: for GN 1/1
• Installation type: under and mounted, front-side ventilation and ventilation, socket-capable
• External dimensions (W x D x H): 1557 x 700 x 800 mm
• Body dimensions (W x D x H): 1557 x 700 x 650 mm
• Height with worktop (optional): 850 mm
• Depth at open door: 1110 mm, with open drawer: 1310 mm
• Gross content: 191 l
• Storage and storage area: 1 x GN-Tragrost 1/1, grey rilsaniert; 1 x Stellage with 6 rails, tilt-proof, grey rilsaniert
• Temperature range: -2 to 10 °C
• Climate class: 5 (+40 °C ambient temperature, 40% relative humidity)
• Relative humidity: 40 to 80 %
• Connection type: centrally cooled (separated liquefaction set)
• Type of cooling: recirculation air cooling, foamed evaporator
• Refrigerant: expansion valve for R-134a pre-installed
• Cooling capacity: 412 W at -10 °C Evaporation temperature
• Control: CRIO SMART display control, digital display
• Defrosting: automatic (suitable to demand), construction-side dew water drain required
• Connection: 0.03 kW, 230 V, 1-phase, 50 Hz
• Protection class: IP21 (water-protected)
• Outside facing: CNS 1.4301
• Internal facing: CNS 1.4301
• Insulation: Cyclopentan hard foam, up to 90 mm
• EU energy label: no EPREL marking requirement (commercial refrigerator with separate liquefaction set according to (EU) 2015/1094)
• Weight: 92 kg net
• Country of origin: Italy

• Centrally cooled, expansion valve for R-134a pre-installed
• 4 CNS semi drawers with telescopic drawer
• CRIO SMART display control with turbo-cooling cycle
• HACCP control function and service alarm
• NFC app control for service and setting parameters
• RS-485 interface, compatible with Modbus and Carel
• Tool-free interchangeable 3-chamber balloon seals
• Under and mounted by front-side ventilation, socket-capable

Notes on establishment and operation

Centrally cooled design: A separate liquefaction kit is required for operation, an external refrigeration machine is optionally available. On the construction side, a dew water drain is required (alternatively electric dew water evaporation tray as an optional equipment). Optional accessories are required for remote and data monitoring via IoT and Ethernet.

Operating instructions

Download user manual (PDF)

Energy labelling

No EU energy label is stored for this device on the manufacturer's side.

Product safety (GPSR)

Manufacturer: ALPENINOX, Viale Treviso 15, 33170 Pordenone, Italy (brand holder: Electrolux Professional S.p.A., Viale Treviso 15, 33170 Pordenone, Italy)
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.