NordCap Cooling table CLO 650 4-7001 with 4 doors for GN 1/1, centrally cooled, 590 l

Product details

The NordCap cooling table CLO 650 4-7001 with four full doors for GN 1/1 is centrally cooled and is operated via the CRIO SMART display control with HACCP control function.

The CLO 650 4-7001 is a four-piece cooling table for GN 1/1 gastro-standard containers and is equipped with four full doors on the front. With outer dimensions of 2011 x 700 x 800 mm (W x D x H), a body height of 650 mm and a gross volume of 590 litres with 327 litres net capacity, it offers cooled storage space directly at the workplace. The temperature range is -2 to 10 °C, the climate class 5 is designed for ambient temperatures up to +40 °C at 40 % relative humidity. The cooling table is supplied in the basic equipment without worktop, is socket-capable and can be installed and installed thanks to front-side ventilation.

The cooling table is controlled via the CRIO SMART display control with digital display, on/off switch and turbo-cooling cycle. A HACCP control function and a service alarm support monitoring during operation, service and adjustment parameters can be controlled via an NFC via an app. The equipment also includes an RS-485 interface, compatible with the Modbus and Carel communication protocols. For real-time access via IoT and Ethernet for remote and data monitoring, optional accessories are required. Four grey-rilsanated GN transformers 1/1 serve as storage and storage area.

Housing and interior are made of stainless steel CNS 1.4301, the rounded corners in the interior make cleaning easier. The full CNS doors open up to an open position at 95° and are equipped with CNS grips and 3-chamber balloon seals, which can be changed without tools. The insulation made of cyclopentan hard foam with a thickness of up to 90 mm keeps the cold in the device, the protection class IP21 protects against drip water. On the device floor, the position for an optional bore of the cleaning process is marked by a deep-drawn marking.

The cooling table is centrally cooled and designed for operation with a separate liquefaction set, an expansion valve for the refrigerant R-134a is pre-installed. The cooling capacity is 412 W at -10 °C evaporation temperature, and is cooled by air through a foamed evaporator. The defrosting is automatic and meets the requirements, on the construction side a dew water drain is required, alternatively an electric dew water evaporation tray is available as a special equipment. The electrical connection value is 0.03 kW at 230 V. Optionally available are an external cooling machine for cooling tables of the CLO 650 series with 4 compartments as well as worktops with upstand or all-sided bending.

• 1 x cooling table CLO 650 4-7001 (basic equipment without worktop)
• 4 x support grating, grey rilsaniert (1 per door compartment)
• 4 x support rails, each 2 pcs (1 x per door compartment)
• Rails, vertical, for max. 15 support rails (2 x per door compartment)
• 4 x feet, CNS, height adjustable

• Manufacturer item number: 402712666
• Divisions: 4 (4 doors)
• Suitable: for GN 1/1
• Installation type: under and mounted, front-side ventilation and ventilation, socket-capable
• External dimensions (W x D x H): 2011 x 700 x 800 mm
• Body dimensions (W x D x H): 2011 x 700 x 650 mm
• Depth at open door: 1110 mm
• Gross content: 590 l, net content: 327 l
• Storage and storage area: 4 x GN-Tragrost 1/1, grey rilsaniert
• Temperature range: -2 to 10 °C
• Climate class: 5 (+40 °C ambient temperature, 40% relative humidity)
• Relative humidity: 40 to 80 %
• Connection type: centrally cooled (separated liquefaction set)
• Type of cooling: recirculation air cooling, foamed evaporator
• Refrigerant: expansion valve for R-134a pre-installed
• Cooling capacity: 412 W at -10 °C Evaporation temperature
• Control: CRIO SMART display control, digital display
• Defrosting: automatic (suitable to demand), construction-side dew water drain required
• Connection: 0.03 kW, 230 V, 1-phase, 50 Hz
• Protection class: IP21 (water-protected)
• Outside facing: CNS 1.4301
• Internal facing: CNS 1.4301
• Insulation: Cyclopentan hard foam, up to 90 mm
• EU energy label: no EPREL marking requirement (commercial refrigerator with separate liquefaction set according to (EU) 2015/1094)
• Weight: 116 kg net
• Country of origin: Italy

• Centrally cooled, expansion valve for R-134a pre-installed
• CRIO SMART display control with turbo-cooling cycle
• HACCP control function and service alarm
• NFC app control for service and setting parameters
• RS-485 interface, compatible with Modbus and Carel
• Tool-free interchangeable 3-chamber balloon seals
• Under and mounted by front-side ventilation, socket-capable

Notes on establishment and operation

Centrally cooled design: A separate liquefaction kit is required for operation, an external refrigeration machine is optionally available. On the construction side, a dew water drain is required (alternatively electric dew water evaporation tray as an optional equipment). Optional accessories are required for remote and data monitoring via IoT and Ethernet.

Operating instructions

Download user manual (PDF)

Energy labelling

No EU energy label is stored for this device on the manufacturer's side.

Product safety (GPSR)

Manufacturer: ALPENINOX, Viale Treviso 15, 33170 Pordenone, Italy (brand holder: Electrolux Professional S.p.A., Viale Treviso 15, 33170 Pordenone, Italy)
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.