NordCap Cooling table CLO 700 2-7031 with 4 half drawers 1/2 for GN 1/1, centrally cooled, -2 to 10 °C

Product details

The NordCap cooling table CLO 700 2-7031 offers 125 liters net capacity for GN 1/1 with four CNS semi-drawers with telescopic pulley and is designed as a centrally cooled unit for connecting to a separate liquefaction set.

The CLO 700 2-7031 is a two-part cooling table for GN 1/1 gastro-standard containers with four CNS semi-drawers with telescopic pulley. It is centrally cooled and therefore designed for operation with a separate liquefaction set, cooled by air in the temperature range from -2 to 10 °C. The external dimensions are 1103 x 700 x 850 mm (W x D x H) with a body height of 700 mm. The gross content is 290 litres, the net content is 125 litres. The climate class 5 stands for an operation up to +40 °C ambient temperature at 40 % relative humidity. The cooling table is supplied in the basic equipment without worktop, is socket-capable and can be lowered and installed thanks to front-side ventilation.

The cooling table is controlled via the CRIO SMART display control with digital display, on/off switch and turbo-cooling cycle. A HACCP control function and a service alarm are integrated, service and adjustment parameters can be controlled via an NFC via an app. The RS-485 interface is compatible with Modbus and Carel communication protocols. Optional accessories are required for real-time access, remote and data monitoring via IoT and Ethernet. Defrosting is automatic and needs-based.

The four CNS semi drawers run on telescopic trains and are equipped with CNS grips and 3-chamber balloon seals that can be changed without tools. Inside and outside, the cooling table is covered with stainless steel CNS 1.4301, rounded corners in the interior facilitate cleaning. The insulation made of cyclopentan hard foam is up to 90 mm thick. IP21 protects against dripping water.

A expansion valve for the refrigerant R-134a is pre-installed, the cooling capacity is 412 W at -10 °C evaporation temperature. The evaporator is foamed. Electrically, the cooling table is connected to 230 V (1-phase, 50 Hz) with a connection value of 0.03 kW. Relative humidity is 40 to 85 %. Optionally available are worktops with up-to-date or all-sided edge for two-door cooling tables of the CLO 650 and CLO 700 series, additional GN transformers 1/1 and support rails, an external machine for cooling tables of the CLO 650 and CLO 700 series with 2 or 3 compartments and an IoT extension module, an Ethernet connection set and a PoE network switch. With worktop the height is 900 mm.

• 1 x cooling table CLO 700 2-7031 (basic equipment without countertop)

• Manufacturer item number: 402712127
• Parts: 2 (4 x CNS half drawer with telescopic drawer)
• Suitable: for GN 1/1
• Installation type: sub- and installation-capable, front-side ventilation and ventilation, socket-capable
• Connection type: Centrally cooled (operation with separate liquefaction set)
• External dimensions (W x D x H): 1103 x 700 x 850 mm
• Body dimensions (W x D x H): 1103 x 700 x 700 mm
• Height with worktop (optional): 900 mm
• Depth with open drawer: 1310 mm
• Gross content: 290 l, net content: 125 l
• Temperature range: -2 to 10 °C
• Climate class: 5 (+40 °C ambient temperature, 40% relative humidity)
• Relative humidity: 40 to 85 %
• Type of cooling: recirculated air cooling
• Refrigerant: expansion valve for R-134a pre-installed
• Cooling capacity: 412 W at -10 °C Evaporation temperature
• Control: CRIO SMART display control
• Defrosting: automatic (suitable for requirements)
• Connection: 0.03 kW, 230 V, 1-phase, 50 Hz
• Protection class: IP21 (water-protected)
• Outside facing: CNS 1.4301
• Internal facing: CNS 1.4301
• Insulation: Cyclopentan hard foam, up to 90 mm
• Weight: 87 kg net
• Country of origin: Italy

• CRIO SMART display control with digital display and turbo-cooling cycle
• HACCP control function and service alarm
• NFC app control for service and setting parameters
• RS-485 interface, compatible with Modbus and Carel
• Centrally cooled, expansion valve for R-134a pre-installed
• CNS semi drawers with telescopic pulley and tool-free interchangeable 3-chamber balloon seals
• Under and mounted by front-side ventilation, socket-capable

Notes on establishment and operation

The cooling table is centrally cooled and is operated with a separate liquefaction kit, an expansion valve for R-134a is pre-installed. A construction-side dew water drain is required, an optional dew water bowl with electric dew water evaporation is available. The position for an optional bore of the cleaning process can be seen on the equipment floor by a deep-drawn marking.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial refrigerated storage cabinets operated with a separate liquefaction set shall not be subject to any EU energy label marking requirement under (EU) 2015/1094 (no EPREL registration).

Product safety (GPSR)

Manufacturer: ALPENINOX, Viale Treviso 15, 33170 Pordenone, Italy (brand holder: Electrolux Professional S.p.A., Viale Treviso 15, 33170 Pordenone, Italy)
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.