NordCap Cooling table CRIO HPO 2-7031 with 4 drawers 1/2 for GN 1/1, centrally cooled, -2 to 10 °C

Product details

The NordCap CRIO HPO 2-7031 cooling table offers four drawers 1/2 125 liters net capacity for GN 1/1 and is designed as a centrally cooled unit for connecting to a separate liquefaction set.

The CRIO HPO 2-7031 is a two-part cooling table for GN 1/1 gastro-standard containers with four drawers 1/2. It is centrally cooled and therefore designed for operation with a separate liquefaction set, cooled by circulating air in the temperature range from -2 to 10 °C. The external dimensions are 1203 x 700 x 850 mm (W x D x H) with a body height of 700 mm, the interior measures 798 x 560 x 550 mm. The gross content is 290 litres, the net content is 125 litres. The climate class 5 stands for operation up to +40 °C ambient temperature at 40% relative humidity. The cooling table is socket-capable and can be installed and installed thanks to front-side ventilation.

The cooling table is controlled via the CRIO SMART display control with digital display, on/off switch and turbo-cooling cycle. A HACCP control function and a service alarm are integrated, service and adjustment parameters can be controlled via an NFC via an app. The RS-485 interface is compatible with Modbus and Carel communication protocols. Optional accessories are required for real-time access, remote and data monitoring via IoT and Ethernet. Defrosting is automatic and needs-based.

The four drawers are equipped with CNS grips and 3-chamber balloon seals. Inside and outside the cooling table is covered with stainless steel CNS 1.4301, the viewing sides are ground, the back wall is galvanized. Rounded corners inside facilitate cleaning, air deflectors under the ceiling lead the cold air. The insulation made of cyclopentan hard foam is up to 90 mm thick. IP21 protects against dripping water.

A expansion valve for the refrigerant R-134a is pre-installed, the cooling capacity is 488 W at -10 °C evaporation temperature. The evaporator is free. Electrically, the cooling table is connected to 230 V (1-phase, 50 Hz) with a connection value of 0.03 kW. Optionally available are worktops with upstand or all-sided edge for CRIO HPO series 2-door cooling tables, a drawer set 1/2 + 1/2, additional GN tray 1/1 and support rails and an IoT extension module, an Ethernet connection set and a PoE network switch. With worktop the height is 900 mm, with worktop and upstand 1000 mm.

• 1 x CRIO HPO 2-7031 cooling table

• Manufacturer item number: 402712835
• compartments: 2 (4 x drawer 1/2)
• Suitable: for GN 1/1
• Installation type: sub- and installation-capable, front-side ventilation and ventilation, socket-capable
• Connection type: Centrally cooled (operation with separate liquefaction set)
• External dimensions (W x D x H): 1203 x 700 x 850 mm
• Body height: 700 mm
• Internal dimensions (W x D x H): 798 x 560 x 550 mm
• Height with worktop (optional): 900 mm, with worktop and upstand: 1000 mm
• Depth with open drawer: 1310 mm
• Gross content: 290 l, net content: 125 l
• Temperature range: -2 to 10 °C
• Climate class: 5 (+40 °C ambient temperature, 40% relative humidity)
• Type of cooling: recirculated air cooling
• Refrigerant: expansion valve for R-134a pre-installed
• Cooling capacity: 488 W at -10 °C Evaporation temperature
• Control: CRIO SMART display control
• Defrosting: automatic (suitable for requirements)
• Connection: 0.03 kW, 230 V, 1-phase, 50 Hz
• Protection class: IP21 (water-protected)
• External facing: CNS 1.4301, back panel galvanized, face faces ground
• Internal facing: CNS 1.4301
• Insulation: Cyclopentan hard foam, up to 90 mm
• Weight: 114 kg net
• Country of origin: Italy

• CRIO SMART display control with digital display and turbo-cooling cycle
• HACCP control function and service alarm
• NFC app control for service and setting parameters
• RS-485 interface, compatible with Modbus and Carel
• Centrally cooled, expansion valve for R-134a pre-installed
• Drawers with CNS grips and 3-chamber balloon seals
• Under and mounted by front-side ventilation, socket-capable

Notes on establishment and operation

The cooling table is centrally cooled and is operated with a separate liquefaction kit, an expansion valve for R-134a is pre-installed. A construction-side dew water drain is required, an optional dew water bowl with electric dew water evaporation is available. The position for an optional bore of the cleaning process can be seen on the equipment floor by a deep-drawn marking.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial refrigerated storage cabinets operated with a separate liquefaction set shall not be subject to any EU energy label marking requirement under (EU) 2015/1094 (no EPREL registration).

Product safety (GPSR)

Manufacturer: ALPENINOX, Viale Treviso 15, 33170 Pordenone, Italy (brand holder: Electrolux Professional S.p.A., Viale Treviso 15, 33170 Pordenone, Italy)
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.