NordCap Cooling table CRIO HPO 4-7001 with 4 full doors for GN 1/1, centrally cooled, -2 to 10 °C

Product details

The NordCap CRIO HPO 4-7001 cooling table offers 423 litres of net capacity for GN 1/1 with four full doors and is designed as a centrally-cooled unit for connecting to a separate liquefaction set.

The CRIO HPO 4-7001 is a four-part cooling table for GN 1/1 gastro-standard containers with four full doors. It is centrally cooled and therefore designed for operation with a separate liquefaction set, cooled by circulating air in the temperature range from -2 to 10 °C. The external dimensions are 2111 x 700 x 850 mm (W x D x H) with a body height of 700 mm, the interior measures 1706 x 560 x 550 mm. The gross content is 590 litres, the net content is 423 litres. The climate class 5 stands for operation up to +40 °C ambient temperature at 40% relative humidity. The cooling table is supplied in the basic equipment without worktop, is socket-capable and can be lowered and installed thanks to front-side ventilation.

The cooling table is controlled by the CRIO TECH display control with temperature control, three-stage humidity control, turbo-cooling cycle, on/off switch as well as acoustic and optical alarm function. An intelligent airflow system ensures airflow in the interior. With Bluetooth technology, HACCP monitoring is possible with the Alpeninox Fridge Control App, while HACCP data is additionally stored in the device. An external diagnostic system can be connected via the RS-485 interface, compatible with the Modbus and Carel communication protocols. Optional accessories are required for real-time access and remote and data monitoring via IoT and Ethernet. Defrosting is automatic and needs-based.

The four full doors open to an open position at 95° and are equipped with CNS grips and 3-chamber balloon seals, which can be changed without tools. Inside and outside the cooling table is covered with stainless steel CNS 1.4301, the viewing sides are ground. Rounded corners in the interior facilitate cleaning, air deflectors under the ceiling lead to cold air. The insulation made of cyclopentan hard foam is up to 90 mm thick. The protection class IP21 protects against dripping water. Each door compartment is equipped with a GN 1/1 (grey rilsaniert), a pair of support rails and two vertical rails for up to 15 support rails, the table is mounted on height-adjustable CNS feet.

A pre-installed expansion valve for the refrigerant R-134a is installed, the cooling capacity is 368 W at -10 °C evaporation temperature. The evaporator is free, the dew water is automatically evaporated by hot gas. Electrically, the cooling table is connected to 230 V (1-phase, 50 Hz) with a connection value of 0.03 kW. Optionally available are worktops with upstand or all-sided edge for 4-door CRIO HPO series cooling tables, a drawer set 1/2 + 1/2, additional GN 1/1 trags and support rails and an IoT extension module, an Ethernet connection set and a PoE network switch. With worktop the height is 900 mm, with worktop and upstand 1000 mm.

• 1 x CRIO HPO 4-7001 cooling table (basic equipment without countertop)
• 1 x support rails (2 pcs) per door compartment
• 1 x support grating, grey rilsaniert, per door compartment
• 2 x rail, vertical, for max. 15 support rails, per door compartment
• 4 x feet, CNS, height adjustable

• Manufacturer item number: 402712272
• compartments: 4 (4 x full door)
• Suitable: for GN 1/1
• Installation type: sub- and installation-capable, front-side ventilation and ventilation, socket-capable
• Connection type: Centrally cooled (operation with separate liquefaction set)
• External dimensions (W x D x H): 2111 x 700 x 850 mm
• Body dimensions (W x D x H): 2111 x 700 x 700 mm
• Internal dimensions (W x D x H): 1706 x 560 x 550 mm
• Height with worktop (optional): 900 mm, with worktop and upstand: 1000 mm
• Depth at open door: 1110 mm
• Gross content: 590 l, net content: 423 l
• Storage and storage area: 4 x GN-Tragrost 1-1, grey rilsaniert
• Temperature range: -2 to 10 °C
• Climate class: 5 (+40 °C ambient temperature, 40% relative humidity)
• Type of cooling: recirculated air cooling
• Refrigerant: expansion valve for R-134a pre-installed
• Cooling capacity: 368 W at -10 °C Evaporation temperature
• Control: CRIO TECH display control
• Defrosting: automatic (suitable for requirements)
• Connection: 0.03 kW, 230 V, 1-phase, 50 Hz
• Protection class: IP21 (water-protected)
• exterior facing: CNS 1.4301, face-ground
• Internal facing: CNS 1.4301
• Insulation: Cyclopentan hard foam, up to 90 mm
• Weight: 145 kg net
• Country of origin: Italy

• CRIO TECH display control with 3-stage humidity control and turbo-cooling cycle
• Bluetooth HACCP monitoring with the Alpeninox Fridge Control App, integrated HACCP storage
• Acoustic and optical alarm function, intelligent airflow system
• RS-485 interface, compatible with Modbus and Carel
• Centrally cooled, expansion valve for R-134a pre-installed
• Tool-free interchangeable 3-chamber balloon seals, doors with opening position at 95°
• Under and mounted by front-side ventilation, socket-capable
• Standard with GN-tragrost per door compartment and height adjustable CNS feet

Notes on establishment and operation

The cooling table is centrally cooled and operated with a separate liquefaction kit, an expansion valve for R-134a is pre-installed. The position for an optional bore of the cleaning process can be seen on the equipment floor by a deep-drawn marking.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial refrigerated storage cabinets operated with a separate liquefaction set shall not be subject to any EU energy label marking requirement under (EU) 2015/1094 (no EPREL registration).

Product safety (GPSR)

Manufacturer: ALPENINOX, Viale Treviso 15, 33170 Pordenone, Italy (brand holder: Electrolux Professional S.p.A., Viale Treviso 15, 33170 Pordenone, Italy)
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.