NordCap Fermenting automatic GSK 460 for 20 x EN 600 x 400, -5 to 45 °C, humidifier, 7-inch touch display

Product details

The NordCap GSK 460 fermentation machine controls the fermentation and temperature-controlled cooling of dough products on up to 20 sheets of EN 600 x 400 mm fully automatic.

The GSK 460 is a fermentation machine in the standard baker's format. It is used for controlled fermentation and temperature-controlled cooling of dough products and absorbs up to 20 sheets in EN 600 x 400 mm format. The gross content is 460 litres, the net content 291 litres. With outside dimensions of 620 x 857 x 2040 mm (W x D x H), the stand unit is narrow and the depth with open door is 1395 mm.

The electronic control in the front panel features a 7.0-inch LED touch display, is multi-lingual and offers an acoustic and optical alarm function. The phases lock, preserve, wake, acidify and hold are automatically activated, they can also be started manually if necessary, and the phases can also be programmed. The temperature range ranges from -5 to 45 °C. The humidity control with humidifier works from 40% to 100%, the fan speed of the air distribution system is five-stage adjustable. HACCP data can be read out via the USB interface, an RS-485 interface is available.

Housing and interior are made of stainless steel CNS 1.4301 in monostructure, the interior has rounded corners, a diamond-ground floor and an integrated floor drain. A CNS slat bar is available per side wall to accommodate support rails, and LED interior lighting provides good visibility. The self-closing CNS full door remains open from 90°, has a lock, a continuous stainless steel handle and a tool-free interchangeable magnetic seal. When the door is opened, the fan wheel is parked, the door stop is right and changeable.

The machine compartment sits on top of the interior and is insulated against the cooling compartment, the components are easily accessible. Cooled by air circulation with the natural refrigerant R-290 (Propane, 85 g) at a cooling capacity of 438 W at -10 °C evaporation temperature, the evaporator is corrosion-resistant. Defrosting by hot gas and dew water evaporation is done automatically. The fermentation machine is plug-in ready for 230 V with 0.32 kW connection value, the energy-saving insulation is up to 75 mm strong, the noise level is about 44 dB.

• 1 x GSK 460 fermenting machine

• Manufacturer item number: 45851600400
• Recording: 20 x EN 600 x 400 mm
• Suitability: for controlled fermentation and tempered cooling of dough products
• External dimensions (W x D x H): 620 x 857 x 2040 mm
• Depth at open door: 1395 mm
• Gross content: 460 l, net content: 291 l
• Temperature range: -5 to 45 °C (at 40 °C ambient temperature and 40 % relative humidity)
• Humidity: humidity regulation with humidifier, 40 to 100 %
• Climate class: 5 (+40 °C ambient temperature, 40% relative humidity)
• Type of cooling: recirculated air cooling
• Refrigerant: R-290 (propane), filling quantity 85 g
• Cooling capacity: 438 W at -10 °C Evaporation temperature
• Control: electronic, LED touch display 7.0 inch, multilingual
• Interfaces: RS 485, USB (HACCP data)
• Water connection: fixed water connection on the back, water flow Ø 20 mm on the bottom
• Connection: plug ready, 0.32 kW, 230 V, 1-phase, 50 Hz
• Insulation: energy-saving insulation, up to 75 mm
• Noise level: approx. 44 dB
• Outside facing: CNS 1.4301, monostructure
• Internal facing: CNS 1.4301
• Weight: 130 kg net
• Country of origin: Italy

• Automatic phase control: Locking, preserving, awakening, acidifying, holding
• Temperature range from -5 to 45 °C
• Humidifier with humidity regulation from 40 to 100 %
• 7.0-inch LED touch display, multilingual, with alarm function
• HACCP data reading via USB, RS-485 interface
• Fan speed 5-stage adjustable, fan stop at door opening
• Diamond ground floor with integrated floor drain, LED interior lighting
• Machine compartment above, insulated from the cooling compartment

Notes on establishment and operation

Supplied without EN sheet. A fixed water connection for water supply (backside) is required for operation, the water flow with Ø 20 mm is arranged below. Support rails and EN-Tragroste 600 x 400 mm are optionally available.

Operating instructions

Download user manual (PDF)

Energy labelling

No EU energy label is stored for this device on the manufacturer's side.

Product safety (GPSR)

Manufacturer: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.