NordCap hood dishwasher H8 DD, insert height 440 mm, up to 80 baskets/h, dosing pumps, 400 V

Product details

The NordCap hood dishwasher H8 DD cleans dishes, pots, pans and GN containers with 440 mm insert height and up to 80 baskets per hour.

The H8 DD is a single wall hood dishwasher for restaurants, large kitchens, factory canteens, hospitals, care facilities, production kitchens and community catering. It cleans dishes, pots, pans, kitchen utensils and gastronorm containers and is also suitable for glasses and cutlery. The insert height is 440 mm, the inner dimensions are 588 x 590 x 440 mm. Theoretically, the machine can produce up to 80 baskets or 1440 plates per hour, 63 baskets or 1134 plates in ETL mode.

The H8 DD is operated via an electronic control system with digital display and touch control panel. Three flushing programs plus ETL mode are available, a soft start program protects sensitive materials such as glass and porcelain, and an automatic self-cleaning program facilitates care. The boiler power can be adjusted on the control panel, self-diagnosis, cycle interruption at hood opening and integrated HACCP storage are available, an external diagnostic system can be connected. The hood is manually moved via a lifting and lowering mechanism with three-sided hood handle.

Housing and interior are made of stainless steel CNS 1.4301, the rear wall of steel sheet is completely closed. The wash tank is deep drawn on the front side, CNS tank filters as well as wash tank and drain filters can be removed for cleaning. Rinsing arms, afterwash arms and nozzles made of stainless steel are interchangeable. The protection class IP25 protects against jet water, the noise level is about 68 dB.

The built-in atmospheric boiler holds 12 liters at 9.00 kW of heating power, the tank 24 liters at 3.00 kW, the water consumption is 2.00 liters. Rinse and clean detergent dosing as well as a pressure increase pump are installed as standard, a lukewarm pump is not available. The machine is connected to 400 V (3N, 50 Hz) with 9.90 kW, the water inlet may be warm to 50 °C at 0.5 to 7 bar and a water hardness up to 5 °dH.

• 1 x hood dishwasher H8 DD
• 1 x basket, plastic, yellow, for 18 soup plates or 27 saucers, Ø to 240 mm, 500 x 500 x 105 mm
• 1 x cutlery container, plastic, yellow, 110 x 110 x 150 mm

• Manufacturer item number: 406505108
• Insert height: 440 mm
• Theoretical power: up to 80 baskets/h (ETL: 63), up to 1440 plates/h (ETL: 1134)
• Rinse programs: 3 + ETL mode
• Rinse temperature: 55 to 65 °C, Rinse temperature: 84 °C
• Boiler capacity: 12 l (9,00 kW), atmospheric boiler, tank capacity: 24 l (3,00 kW)
• Water consumption: 2,00 l
• External dimensions (W x D x H): 746 x 877 x 1549 mm
• Body dimensions (W x D x H): 667 x 755 x 1349 mm
• Internal dimensions (W x D x H): 588 x 590 x 440 mm
• Height with open hood: 2026 mm
• Connection: 9,90 kW, 400 V, 3N, 50 Hz
• Water supply: up to max. 50 °C, water pressure 0.5 to 7 bar
• Water hardness: up to 5 °dH (water softener only externally)
• Dishes: Series, Dishes: Series
• Pressure booster pump: series, lukewarm pump: no
• Defect diagnosis system: series, cleaning system: series
• Protection class: IP25 (pollution-protected)
• Noise level: approx. 68 dB
• exterior facing: CNS 1.4301, rear wall steel sheet, completely closed
• Internal facing: CNS 1.4301
• Installation type: Stand-up equipment
• Weight: 106 kg net
• Country of origin: Italy

• Three flushing programs plus ETL mode, soft start program for glass and porcelain
• Integrated HACCP storage, self-diagnosis, connection to external diagnostic system
• Touch control panel with adjustable boiler power
• Automatic self-cleaning program
• Standard pressure booster pump as well as flushing and flushing agent dosing
• Three-sided hood handle, cycle interruption at hood opening
• Replaceable stainless steel flush arms and after-wash arms, removable filters

Notes on establishment and operation

Connection to 400 V three-phase current by an electric specialist. On the construction side water inlet (up to 50 °C, 0.5 to 7 bar) and water drain are required, a lukewarm pump is not installed. The machine is designed for a water hardness up to 5 °dH, a water softener is only possible externally.

Operating instructions

Download user manual (PDF)

Note on warranty

According to NordCap manufacturer, only the fully completed and returned to NordCap commissioning protocol flushing technology entitles the warranty claim. On request, the dishwasher can be professionally put into operation and washed in on-site by a service partner authorized by NordCap; this additional service from NordCap will be charged at a flat rate.

Energy labelling

Commercial dishwashers are currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: ZANUSSI PROFESSIONAL, Viale Treviso 15, 33170 Pordenone, Italy (trade mark holder: stock bullage Electrolux, 105 45 Stockholm, Sweden)
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.