NordCap Cough protection with heat bridge WB HS 2-1-45, 450 mm high, ESG disc curved, LED lighting

Product details

The NordCap cough protection WB HS 2-1-45 with heat bridge is mounted via heat devices such as Bain-Maries or heat plates and shields the food with a curved ESG disc.

The WB HS 2-1-45 is a cough protection with heat bridge for mounting via heat devices, for example via Bain-Maries or heat plates. With a width of 830 mm, a depth of 430 mm and a height of 450 mm, it forms a structure above the worktop that protects the delivered food from direct coughing and sneezing. The disc made of ESG is curved on one side.

The construction of round tubular beams with a diameter of 38 mm is carried. An integrated LED lighting directs the view to the presented food. The heat bridge is designed for use via heat devices, the electrical connection value is 0.86 kW at 230 V, 1-phase, 50 Hz.

External and internal cladding are made of stainless steel CNS 1.4301, the chrome nickel steel used in catering and large kitchen. The electrical wiring runs in the round tube and is loosely led out.

The cough guard is secured by counter thread M20, which screws it into a worktop with 70 mm thickness. This creates a firm, permanent connection with the counter or the output furniture. The weight is 26 kg net, the cough guard is manufactured in Austria. A manufacturer's instruction for heat display cases is available.

• 1 x cough protection with thermal bridge WB HS 2-1-45

• Manufacturer item number: 484535001
• Suitable: for mounting on heat equipment such as Bain-Maries or heat plates
• External dimensions (W x D x H): 830 x 430 x 450 mm
• Disc: ESG, curved on one side
• Carrier: round tube, Ø 38 mm
• Lighting: LED
• Mounting: counter thread M20 for screwing in on-site worktop, thickness 70 mm
• Connection: 0.86 kW, 230 V, 1-phase, 50 Hz
• Outside and inside facing: CNS 1.4301
• Weight: 26 kg net
• Country of origin: Austria

• Heat bridge for mounting via Bain-Maries or heat plates
• ESG disc, curved on one side
• Integrated LED lighting
• Wiring in the round tube guided
• Fixed fitting with counter thread M20
• stainless steel CNS 1.4301

Notes on establishment and operation

The assembly is carried out by screwing with counter thread M20 into a worktop with 70 mm thickness. The electrical wiring is carried out loosely in the round tube downwards.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: AKE Ausseer Kühle- und Edelstahltechnik GmbH, Pichl 66, 8984 Bad Mitterndorf, Austria
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.