NordCap Installation bain-marie SOUL-RED 2/1 for 2 x GN 1/1-200, 60 to 99 °C, automatic water filling

Product details

The NordCap built-in bain-marie SOUL-RED 2/1 keeps food warm in two GN containers 1/1-200 at 60 to 99 °C and is installed directly into an existing worktop.

The SOUL-RED 2/1 is a compact device for installation in an existing worktop. The tub can accommodate two GN 1/1-200 gas standard containers, a standard longitudinal bar with a width of 325 mm is used to support the containers. With outside dimensions of 844 x 650 x 290 mm (W x D x H) and an installation cut-out of 814 x 620 mm, the footprint is 0.33 m2. The inner dimensions of the tub are 660 x 510 x 210 mm.

The temperature can be set in the range of 60 to 99 °C. The electronic control system with digital display is controlled, which is loosely attached with its own installation housing. The installation housing has installation dimensions of 366 x 90 mm (W x H), the cable length is approx. 1.2 meters, so that the control can be placed in easily accessible place.

The water is filled automatically, at a low water level, the device emits an alarm. Excess water drains over an overflow hose. The covering and tub are made of CNS 1.4301, the tub edge is 70 mm edged. The double-wall insulation keeps the heat in the tub. Optionally available are a matching cough protection with halogen lamp and a chrome-plated underframe with four wheels, two of which can be detected.

The tub is heated indirectly via a radiator under the tub floor. The bain-marie is plug-in for 230 V with a connection value of 1.00 kW. With a net weight of 31 kg it can be handled well and inserted into the prepared worktop.

• 1 x built-in bain-marie SOUL-RED 2/1 with control in the housing
• 1 x longitudinal bar, width 325 mm

• Manufacturer item number: 434800001
• Suitable: for GN 1/1-200
• Recording (optional): 2 x GN 1/1-200
• External dimensions (W x D x H): 844 x 650 x 290 mm
• Internal dimensions (W x D x H): 660 x 510 x 210 mm
• Installation cut-out (W x D): 814 x 620 mm
• Surface area: 0,33 m2
• Temperature range: 60 to 99 °C
• Heating: radiator under the tub floor, tub indirectly heated
• Control: electronic, digital display, loosely attached with built-in housing (installation dimensions W x H: 366 x 90 mm), cable length approx. 1.2 m
• Water: automatic water filling, alarm at low water level, water discharge through overflow hose
• Connection: plug-in, 1,00 kW, 230 V, 1-phase, 50 Hz
• Insulation: double wall insulated
• External facing: CNS 1.4301, tub edge 70 mm edged
• Internal facing: CNS 1.4301
• Weight: 31 kg net
• Country of origin: Italy

• Installation in existing worktop
• Automatic water filling with low water level alarm
• Indirectly heated tub, radiators under the tub floor
• Control in separate housing with approx. 1.2 m cable
• Double wall insulated, stainless steel CNS 1.4301
• Cough protection and underframe optionally available

Notes on establishment and operation

The unit is installed in an existing worktop, the installation cut-out is 814 x 620 mm (W x D). For the loosely attached control a installation dimension of 366 x 90 mm (W x H) is provided, the cable length is approx. 1.2 meters.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.