NordCap Ice cube maker SDH 30 L, hollow cubes up to 32 kg/24 h, 6 kg storage container, air-cooled

Product details

The NordCap ice cube maker SDH 30 L produces up to 32 kg of hollow cubes in 24 hours and stores them in the integrated 6-kg container.

The SDH 30 L is a compact, air-cooled ice cube maker. It produces hollow cubes that are particularly suitable for chilled juices and soft drinks. The capacity is up to 32 kg ice in 24 hours, a single cube measures approx. 35 x 29 x 36 mm (W x D x H) and weighs about 21 grams. With external dimensions of 334 x 457 x 599 mm (W x D x H), the stand requires only a small footprint.

The cubes are collected in the integrated storage container, which holds 6 kg or about 290 ice cubes. Ice production works with a positive spraying system and a fully automatic production control, the defrosting is done automatically with hot gas and fresh water. A cleaning system is available as standard, and the discharge nozzles are already pre-installed, which simplifies commissioning.

The housing is made of stainless steel 1.4509 with rounded edge protection, the inner container is deep drawn in a pcs of polyethylene. All water-bearing parts are made of food-safe materials. For regular care, the air filter can be washed out, dirt-prone components can be removed from the front. The scope of delivery includes drain hose, connection hose and ice shovel.

The machine is air-cooled and works with the natural refrigerant R-290 (propane) with a filling quantity of 95 g. It is plug-in for 230 V with a connection value of 0.31 kW and a protection of 10 A, the energy consumption is 5.95 kWh in 24 hours. Operation is possible up to 43 °C ambient temperature, the production volume depends on ambient and water intake temperature. A water supply with 5 to 38 °C at 1 to 5 bar and a water flow are required.

• 1 x ice cube maker SDH 30 L
• 1 x drain hose
• 1 x connection hose
• 1 x ice shovel

• Manufacturer item number: 41330301063
• Ice shape: hollow cube, approx. 35 x 29 x 36 mm (W x D x H), approx. 21 g
• Production output: up to 32 kg / 24 h
• Storage tank: 6 kg (approx. 290 ice cubes), integrated
• External dimensions (W x D x H): 334 x 457 x 599 mm
• Installation type: Stand-up equipment
• Type of cooling (machine): air cooling
• Refrigerant: R-290 (propane), filling capacity 95 g
• Cleaning system: series
• Connection: plug ready, 0.31 kW, 230 V, 1-phase, 50 Hz
• Hedging: 10 A
• Energy consumption: 5.95 kWh / 24 h
• Water inflow: 5 to 38 °C, water pressure 1 to 5 bar
• Device operation up to 43 °C ambient temperature
• Outside facing: stainless steel 1.4509, rounded edge protection
• Inner container: polyethylene, deep drawn in a pcs
• Weight: 28 kg net
• Country of origin: Italy

• Hollow cubes, ideal for chilled juices and soft drinks
• Positive spray system with fully automatic production control
• Automatic defrosting with hot gas and fresh water
• Cleaning system as standard
• Washable air filter, dirt-prone components can be extended from the front
• Pre-installed discharge nozzles

Notes on establishment and operation

The installation requires a wall spacing of at least 152 mm. On the construction side, a water inlet and a water drain are required. The amount of ice produced daily may vary depending on the water inlet temperature.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial ice makers are currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.