NordCap blast chiller / blast freezer P5.1 POWER-LINE, 5 x GN 1/1 or EN 600 x 400, 25 kg/cycle, 230 V

Product details

The NordCap P5.1 POWER-LINE cools and freezes 25 kg of food per cycle and can be used alone or as a stack module under a Rational iCombi 6 1/1.

The P5.1 POWER-LINE is a multi-function device for quick cooling and shock frosting in the module system. It works in the longitudinal infeed and takes up either 5 x GN 1/1-65, 5 x GN 1/1-40 or EN 600 x 400 mm, with special accessories up to 10 x GN 1/1-20, alternatively up to 6 ice dishes with 5.0 litres. It processes 25 kg of product per cycle, from +90 to 3 °C and from +90 to -18 °C for shock frosting.The device can be used stand-alone or as a stack module with a Rational iCombi 6 1/1 combi steamer, the appropriate installation kit is included.

Control is controlled by an electronic PLC controller with 4.3-inch LED touch display in capacitive technology and protection class IP65, the control board is protected according to IP67. 72 cycles are available, a diagnostic display informs about air speed, energy consumption, valve function and liquefaction pressure. Ethernet and USB interfaces enable the reading of HACCP data, online support around the clock and HACCP data in the cloud are optional. A core temperature sensor with two measuring points is part of the standard equipment.

Housing, door frame and interior are made of stainless steel CNS 1.4301. The interior has rounded corners and an integrated floor drain with stopper. The self-closing CNS full door with ergonomic handle has a tool-free interchangeable magnetic seal, the door stop is on the right and can be changed on the factory side at no extra charge. Only at the end of production is thawed, during the working cycles no defrosting is necessary, the dew water shell can be pulled out. The protective grill of the machine compartment is removable for cleaning.

A bionic EC ventilator in IP54 protection class with electronic speed from 10 to 100 % adjustable, special air ducts and the E-Plus system ensure a uniform air flow, while opening the door, the fan stops. An electronic expansion valve and the XL evaporator surface with cathodic submersible coating support the rapid heat withdrawal. The cooling capacity is 2750 W at -10 °C evaporation temperature with R-290 (propane, 230 g). The connection is ready for plug-in on 230 V with 1.10 kW and 6.2 A protection.

• 1 x blast chiller / blast freezer P5.1 POWER-LINE
• 1 x connection cable
• 1 x frame frame, for GN 1/1 or EN 600 x 400
• 1 x installation kit for combi steamer Rational iCombi 6 1/1
• 1 x core temperature sensor with two measuring points
• 4 x feet, height adjustable, H 55 to 60 mm
• 5 x support rails (per 2 pcs)

• Manufacturer item number: 4492000515
• Mount (optional): 5 x GN 1/1-65, 5 x GN 1/1-40 or EN 600 x 400 mm, insert lengthwise; up to 10 x GN 1/1-20 with special accessories; up to 6 x ice bowl 5.0 l (330 x 165 x 120 mm)
• Power: 25 kg Product quantity per cycle (quick cooling +90 °C to 3 °C), 25 kg per cycle (shock frosts +90 °C to -18 °C)
• Temperature range Quick cooling: 90 to 3 °C (at 32 °C ambient temperature and 55 % relative humidity)
• Temperature range Shock frosts: 90 to -18 °C (at 32 °C ambient temperature and 55 % relative humidity)
• Working temperature: -40 to 3 °C
• Input temperature: up to +90 °C
• External dimensions (W x D x H): 875 x 842 x 875 mm
• Height with rollers: 917 mm
• Internal dimensions (W x D x H): 479 x 639 x 413 mm
• Depth with open door: 1375 mm
• Climate class: 4 (+30 °C ambient temperature, 55% relative humidity)
• Type of cooling: recirculated air cooling
• Refrigerant: R-290 (propane), filling quantity 230 g
• Cooling capacity: 2750 W at -10 °C Evaporation temperature
• Control: electronic PLC control, LED touch display 4.3 inch (IP65), 72 cycles
• Interfaces: Ethernet, USB (HACCP data)
• Connection: plug ready, 1,10 kW, 230 V, 1-phase, 50 Hz
• Hedging: 6,2 A
• Insulation: PUR hard foam, up to 70 mm
• Outside facing: CNS 1.4301, door frame made of CNS 1.4301
• Internal facing: CNS 1.4301
• Weight: 125 kg net
• Country of origin: Italy

• Stand-alone or as stack module with Rational iCombi 6 1/1, installation kit included
• Quick cooling and shock frosts with 25 kg each per cycle
• PLC control with 4.3-inch touch display (IP65) and 72 cycles
• Core temperature sensor with two measuring points as standard
• Bionic EC fan, 10 to 100 % adjustable, E-Plus system
• Defrosting only at the end of production, not during cycles
• Diagnostic display for air speed, energy consumption, valve function and liquefaction pressure
• Door stop without extra charge changeable on the factory side

Notes on establishment and operation

Ice bowls and GN sheets are not included in the scope of delivery. For ventilation and ventilation, a minimum spacing of 60 mm from the sides and the rear wall is to be planned. For appliances with combustible refrigerant R-290 and a filling quantity of more than 150 g, a minimum room size as well as the permissible installation and installation conditions must be observed. When using with roller set, follow the operating instructions. A desired door stop on the left must be indicated when ordering.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial blast chiller and blast freezer are currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: NUOVAIR, Via Padania 9/C, 31020 San Vendemiano (Treviso), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.