NordCap MORETTI Electric pizza oven iDeck iD-D 60.60 DIGITAL, 2 baking chambers, each 4 x pizza Ø 30 cm, up to 380 °C, 400 V

Product details

The NordCap MORETTI electric pizza oven iDeck iD-D 60.60 DIGITAL bakes with two baking chambers on Schamottstein floor – optionally 4 + 4 x pizza Ø 30 cm, 1 + 1 x pizza Ø 45 cm or 1 + 1 x pizza sheet 600 x 400 mm.

The MORETTI iDeck iD-D 60.60 DIGITAL is an electric pizza oven from the iDeck series with two baking chambers. It is suitable for direct baking on the Schamottstein floor as well as for baking on EN sheets 600 x 400 mm. In each of the two baking chambers you can choose 4 x pizza Ø 30 cm, 1 x pizza Ø 45 cm or 1 x pizza sheet 600 x 400 mm. Each baking chamber measures 614 x 660 mm inside with an internal height of 140 mm.

The oven is operated via an electronic control system with digital display, start/stop function, light function and backtimer. The upper and lower heat can be controlled separately electronically, each chamber has its own temperature sensor. The working temperature range is between 50 and 380 °C, and the temperature can be increased to 450 °C for cleaning. A shock-proof halogen lamp illuminates the baking chambers so that the baking progress remains visible at all times.

The stainless steel oven flap with safety glass can be folded down, it has a stainless steel handle and a spring-supported door opening system. Reinforced heating elements lie below the sandblasted Schamottstein floor, the baking chamber is covered with steel sheet. Outside, the oven is covered with stainless steel, an energy-saving insulation made of mineral wool keeps the heat in the baking chambers.

The furnace is connected to 400 V three-phase current (3N, 50 Hz), the connection value is 8.40 kW with a protection of 19.0 A, the energy consumption is 4.20 kWh per operating hour. The outside dimensions are 850 x 991 x 660 mm (W x D x H), with open flap 1109 mm depth. The furnace is supplied without cover hood and underframe. Optionally available are a cover hood, a hood with motor, a fermentation cabinet for up to 2 baking chambers, baking tray rails and underframes with wheels in 705 or 1005 mm height.

• 1 x electric pizza oven iDeck iD-D 60.60 DIGITAL (2 baking chambers, without cover and underframe)

• Manufacturer item number: 493060060222
• Baking chambers: 2
• Installation type: Stand-up equipment
• Suitable: direct baking or baking on EN sheet 600 x 400 mm
• Recording (optional): 4 + 4 x pizza Ø 30 cm, 1 + 1 x pizza Ø 45 cm or 1 + 1 x pizza plate 600 x 400 mm
• Temperature range: 50 to 380 °C, for cleaning up to 450 °C
• Control: electronic, digital display, start/stop, light, backtimer, temperature sensor per chamber, top and bottom heat separately adjustable
• External dimensions (W x D x H): 850 x 991 x 660 mm
• Internal dimensions (W x D x H): 614 x 660 x 140 mm per baking chamber
• Depth with open flap: 1109 mm
• Type of energy: electric
• Connection: 8,40 kW, 400 V, 3N, 50 Hz
• Hedging: 19,0 A
• Energy consumption: 4,20 kWh / Operating hour
• Heating: reinforced heating elements below the Schamottstein floor
• Insulation: energy-saving insulation (mineral wool)
• Facing outside: stainless steel
• Internal cladding: steel sheet, baking chamber with sandblasted Schamottstein floor
• Weight: 133 kg net
• Country of origin: Italy

• Two baking chambers with sandblasted Schamottstein floor
• Electronically adjustable over and underheat separately
• 50 to 380 °C, cleaning function up to 450 °C
• Digital display with backtimer and light function
• stainless steel oven flap with safety glass and spring-assisted door opening system
• Shock-proof halogen interior lighting
• Energy-saving insulation made of mineral wool

Notes on establishment and operation

Supplied without cover and underframe; both are available as optional accessories. Underframes are delivered disassembled, the installation on site is required. Connection to 400 V three-phase current by an electric specialist.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: Moretti Forni Spa, Via Meucci 4, 61037 Mondolfo (PU), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.