NordCap Low temperature CSD 003 E with 3 GN drawers 1/1, longitudinal infeed, 30 to 120 °C, core temperature sensor

Product details

The NordCap low-temperature cooking CSD 003 E cooks and keeps food in three GN drawers 1/1-150 in the longitudinal infeed at low temperatures controlled warm – with core temperature probe and time control.

The CSD 003 E is designed for keeping warm and controlled cooking of food at low temperatures. With outer dimensions of 450 x 660 x 730 mm (W x D x H), the tableware is narrow and can be installed and stacked. Three GN drawers 1/1 each with 150 mm useful height will either accommodate three containers GN 1/1-150 in the longitudinal insert, the power is indicated with 18 kg product quantity per cycle. The working temperature range ranges from 30 to 120 °C.

The device is operated via an electronic control in the front panel with digital display, main switch and start/stop button. It is either cooked according to time, temperature or core temperature, as standard a 1-point core temperature sensor is included. A warm hold function keeps the food at temperature after cooking, a manual key lock protects against accidental adjustment. At the front are adjustable vent valves.

The drawers close with magnetic closure, have an ergonomic grip and a heat and aging resistant seal. The interior of CNS 1.4301 has rounded corners and can be cleaned well, the exterior panel is made of CHR 1.4016. An energy-saving insulation with up to 40 mm thickness keeps the heat in the device. Each compartment has a removable mounting frame, the device stands on four suction cup feet.

The entire cooking room is heated by a static heating system, a safety thermostat is installed. The connection is electrically connected to 230 V with a connection value of 1.00 kW and a protection of 4.4 A, the protection class IPX4 protects against splash water. Optionally available are height-adjustable feet with 110 to 140 mm, a roller frame with four wheels, two with brakes, and lateral handles for transporting the device.

• 1 x low temperature CSD 003 E
• 1 x 1-point core temperature sensor
• 1 x frame frame, removable, per compartment
• 4 x suction cup feet

• Manufacturer item number: 437010003
• Installation type: Tableware, mountable, stackable
• Suitability: for keeping warm and controlled cooking of food at low temperatures
• Recording (optional): 3 x GN 1/1-150, slot lengthwise
• Drawers: 3 x GN drawer 1/1, usable height per 150 mm
• Power: 18 kg Product quantity per cycle
• Working temperature: 30 to 120 °C
• External dimensions (W x D x H): 450 x 660 x 730 mm
• Depth with open drawer: 1065 mm
• Control: electronic (in the front panel), digital display, time, temperature and core temperature sensor control
• Heating: static, for entire cooking room, safety thermostat
• Type of energy: electric
• Connection: 1,00 kW, 230 V, 1-phase, 50 Hz
• Hedging: 4,4 A
• Protection class: IPX4 (splashproof)
• Insulation: energy-saving insulation, up to 40 mm
• External facing: CHR 1.4016
• Internal facing: CNS 1.4301
• Weight: 58 kg net
• Country of origin: Italy

• Cooking by time, temperature or core temperature
• 1-point core temperature probe as standard
• Warm hold function and manual key lock
• 3 GN drawers 1/1-150 in longitudinal slot with magnetic closure
• Narrow design with 450 mm width
• Adjustable venting valves at the front
• Fitable and stackable
• Interior with rounded corners

Notes on establishment and operation

A minimum spacing of 50 mm shall be observed for the rear wall.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: Moduline S.R.L., Via dell' Industria 11, 31029 Vittorio Veneto (TV), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.