NordCap Combi-cars for cooling and regenerating RRD 101 E, mobile, 10 x GN 1/1 or EN 600 x 400, 0 to 160 °C

Product details

The mobile NordCap RRD 101 E combi car cools and regenerates food in one device – on 10 trays for GN 1/1 or EN 600 x 400, with working temperatures from 0 to 160 °C.

The RRD 101 E combines cooling and regeneration in a mobile stand. Foods are used with an input temperature of +3 °C, the working temperature ranges from 0 to 160 °C. The standard, removable mounting frame accommodates 10 x GN 1/1-76 in the cross-input, 20 plates with 200 to 260 mm or 10 plates with 270 to 320 mm diameter can be used. NordCap gives an output of 36 kg per cycle.

Four 125 mm diameter wheels, two of them with brakes, ergonomic handles for pushing and a circumferential rubber floor strip make the car mobile. The electronic control in the front panel has a multilingual 4.3-inch LED touch screen, main switch and start/stop button. Time, temperature and humidity are adjustable, a start delay is possible. At the end of the cycle, an acoustic signal sounds, the temperature is lowered and the warm holding function takes over.

The full door with snap closure, rotary handle and heat and aging resistant seal is hit on the left, the stop can be changed on the factory side at extra cost. The interior of CNS 1.4301 has rounded corners, the frame can be removed for cleaning and the maintenance components are easily accessible. Outside, the device is covered with CHR 1.4016, the energy-saving insulation is up to 35 mm thick.

Cooled by air convection via an evaporator made of stainless steel with the refrigerant R-290 (Propane, GWP 3), heated by a recirculating air heating system with autoreverse fan wheel operation and safety thermostat. An air vent is located in the top plate, for the moisture there is a retractable water tank and a central cooking chamber drain. Connected to 400 V (3N, 50 Hz) with 6.80 kW and a protection of 9.9 A, the protection class is IPX4. Optionally available are, among other things, core temperature sensors, the climachech system, a glass door with separate lighting and frame frames for 8 x GN 1/1 and 8 x EN 600 x 400 with 96 mm slot spacing.

• 1 x Combi carriage for cooling and regeneration RRD 101 E
• 1 x mounting frame, removable, for 10 x GN 1/1, insert distance 76 mm
• 4 x castors Ø 125 mm, of which 2 with brakes

• Manufacturer item number: 437054101
• Installation type: Stand-up device (mobile)
• Suitability: for cooling and regeneration
• Recording (optional): 10 x GN 1/1-76 (reels across), 20 x plate Ø 200 to 260 mm, 10 x plate Ø 270 to 320 mm
• Frame frame (standard): for 10 x GN 1/1, insert distance 76 mm
• Power: 36 kg Product quantity per cycle
• Input temperature: +3 °C
• Working temperature: 0 to 160 °C
• External dimensions (W x D x H): 880 x 829 x 1640 mm
• Depth at open door: 1537 mm
• Control: electronic (in front panel), LED display 4.3 inch, touch screen, multilingual
• Control: time, temperature, humidity; start delay, warm holding function
• Cooling: recirculating air cooling, evaporator with recirculating air, stainless steel
• Refrigerants: R-290 (propane), GWP 3
• Heating: recirculation air, autoreverse fan wheel operation, safety thermostat
• Water supply: retractable water tank, central cooking room drain
• Door: 1 x full door, snap closure, rotary handle, door stop left
• Type of energy: electric
• Connection: 6,80 kW, 400 V, 3N, 50 Hz
• Hedging: 9,9 A
• Protection class: IPX4 (splashproof)
• Insulation: energy-saving insulation, up to 35 mm
• External facing: CHR 1.4016
• Internal facing: CNS 1.4301
• Weight: 159 kg net
• Country of origin: Italy

• Cooling and regenerating in one unit, 0 to 160 °C
• Can be driven on 4 wheels, of which 2 with brakes
• Refrigerant cooling with stainless steel evaporator, refrigerant R-290
• Invertible water tank
• LED touch screen 4.3 inch, multilingual
• Time, temperature and humidity control with start delay
• Circulating rubber floor strip and ergonomic sliding handles

Notes on establishment and operation

The connection to 400 V three-phase current must be made by an electric specialist. GN container is not included.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: Moduline S.R.L., Via dell' Industria 11, 31029 Vittorio Veneto (TV), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.