NordCap RRFF 20 E regenerative furnace for horde carriages 20 x GN 1/1 or plate horde wagons, climachef

Product details

The NordCap RRFF 20 E entry-level regeneration furnace regenerates refrigerated or frozen meals directly on the retracted horde car or plate horde car – with climachef system, core temperature sensor and USB interface as standard.

The RFF 20 E is a stand-up device for regenerating chilled or frozen meals in GN containers on horde carts or plates on plate carts. Optionally, a horde cart for 20 x GN 1/1 or a plate cart for 62 or 84 plates can be inserted into the cooking room. The input temperature is indicated with +3 °C, working between 30 and 210 °C. NordCap specifies an output of 72 kg per cycle, the internal dimensions are 780 x 695 x 1860 mm (W x D x H).

The electronic control in the front panel features a multilingual 4.3-inch LED touch screen, main switch and start/stop button. Time, temperature and humidity are adjustable, the standard climachef system automatically controls the humidity. A start delay is possible, an acoustic signal is heard at the end of the cycle, the temperature is lowered and the warm holding function keeps the food ready. A 1-point core temperature sensor and a USB interface for reading HACCP data are standard equipment.

The full door closes with 3-point closure and heat and aging resistant seal, it is opened by a rotary handle, the door stop is right and not changeable. In the cooking room is attached a stainless steel shock guard. The interior of CNS 1.4301 has rounded corners and a flat stainless steel floor. Outside, the device is covered with CHR 1.4016, the energy-saving insulation is up to 35 mm thick.

The heating is provided by an air-cooled heating system with autoreverse fan wheel operation and safety thermostat, and automatic moisture venting is available. A water connection with 1.5 to 5 bar water pressure is required for moisture, cabling and components are easily accessible. It is connected to 400 V (3N, 50 Hz) with 12.50 kW and a protection of 18.1 A, the protection class is IPX4. Optionally available are a horde car for 20 x GN 1/1, a plate horde car for 84 plates with 230 to 310 mm diameter, matching thermal ceilings, a multipoint or needle core temperature sensor and an adjustable fan speed.

• 1 x RRFF 20 E entry-level regeneration furnace
• 1 x 1-point core temperature sensor
• 1 x USB interface for reading HACCP data

• Manufacturer item number: 437052020
• Installation type: Stand-up equipment
• Suitable: for regenerating chilled or frozen meals in GN containers on horde carts or plates on plate carts
• Recording (optional): 1 x horde car for 20 x GN 1/1, 1 x horde car for 62 x plate, 1 x horde car for 84 x plate
• Power: 72 kg Product quantity per cycle
• Input temperature: +3 °C
• Working temperature: 30 to 210 °C
• External dimensions (W x D x H): 1179 x 993 x 1967 mm
• Internal dimensions (W x D x H): 780 x 695 x 1860 mm
• Depth with open door: 1849 mm
• Control: electronic (in front panel), LED display 4.3 inch, touch screen, multilingual
• Control: time, temperature, humidity; climachef system for automatic humidity control; start delay, warm holding function
• Heating: recirculation air, autoreverse fan wheel operation, safety thermostat
• Door: 1 x full door, 3-point lock, turn handle, right door stop, non-changeable
• Connection: 12.50 kW, 400 V, 3N, 50 Hz
• Hedging: 18,1 A
• Water connection: construction side, water pressure 1.5 to 5 bar
• Protection class: IPX4 (splashproof)
• Insulation: energy-saving insulation, up to 35 mm
• External facing: CHR 1.4016
• Internal facing: CNS 1.4301
• Weight: 205 kg net
• Country of origin: Italy

• Introductory model for hordes and plate hordes
• Climachef system for automatic humidity control as standard
• 1-point core temperature sensor and USB interface for HACCP data as standard
• LED touch screen 4.3 inch, multilingual
• Flat stainless steel floor and stainless steel floor protection in the cooking room
• 3-point closing of the full door
• 72 kg product quantity per cycle

Notes on establishment and operation

Horde and plate horde trolleys are not included. For operation a water connection (1.5 to 5 bar) is required. The connection to 400 V three-phase current must be made by an electric specialist.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: Moduline S.R.L., Via dell' Industria 11, 31029 Vittorio Veneto (TV), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.