NordCap Regeneration oven RRT 153 E, mobile, 2 full doors, for 32 x GN 1/1 or 16 x GN 2/1, touch screen

Product details

The mobile NordCap regeneration oven RRT 153 E regenerates large quantities of chilled food to 16 x GN 2/1 or 32 x GN 1/1 – with two full doors and retractable water tank.

The RRT 153 E is the large, mobile stand-up unit of the series for the regeneration of chilled food, which is used with a temperature of +3 °C. The standard, removable mounting frame accommodates 16 x GN 2/1-72, optionally 32 x GN 1/1-72 can be used in longitudinal or transverse inserts, 64 plates with 200 to 260 mm or 32 plates with 270 to 320 mm diameter. The working temperature range ranges from 30 to 210 °C, the power is given by NordCap with 115 kg product quantity per cycle.

The device is mounted on four rolls with a diameter of 150 mm, two of them with brakes. Ergonomic handles for pushing and a circulating rubber floor strip facilitate the process. The system is operated via electronic control in the front panel with a multilingual 4.3-inch LED touch screen, main switch and start/stop button. Time, temperature and humidity are adjustable, a start delay is possible. At the end of the cycle an acoustic signal sounds, the temperature is lowered and the warm-keeping function takes over.

Two full doors with snap closure, each with a rotary handle and heat- and aging-resistant seal close the cooking compartment, the door stop is left and not changeable. The interior of CNS 1.4301 has rounded corners, the frame can be removed for cleaning and the maintenance components are easily accessible. Outside the device is covered with CHR 1.4016, the energy-saving insulation has a thickness of up to 35 mm.

The moisture comes from a retractable water tank, the waste water is collected in a catcher tray below. The air-cooling system works with autoreverse fan wheel operation and safety thermostat, a vent valve sits in the top plate. It is connected to 400 V (3N, 50 Hz) with 10.15 kW and a protection of 14.7 A, the protection class is IPX4. Optionally available are core temperature sensors, the climachef system for automatic humidity control, glass doors with separate lighting, a USB interface for reading HACCP data and an adjustable fan speed.

• 1 x regeneration furnace RRT 153 E, mobile
• 1 x mounting frame, removable, for 16 x GN 2/1, slot spacing 72 mm
• 4 x castors Ø 150 mm, of which 2 with brakes

• Manufacturer item number: 437051153
• Installation type: Stand-up device (mobile)
• Suitability: for regenerating chilled food
• Recording (optional): 16 x GN 2/1-72, 32 x GN 1/1-72 (reels lengthwise / crosswise), 64 x plates Ø 200 to 260 mm, 32 x plates Ø 270 to 320 mm
• Frame frame (standard): for 16 x GN 2/1, slot spacing 72 mm
• Power: 115 kg Product quantity per cycle
• Input temperature: +3 °C
• Working temperature: 30 to 210 °C
• External dimensions (W x D x H): 1000 x 855 x 1680 mm
• Depth at open door: 1515 mm
• Control: electronic (in front panel), LED display 4.3 inch, touch screen, multilingual
• Control: time, temperature, humidity; start delay, warm holding function
• Heating: recirculation air, autoreverse fan wheel operation, safety thermostat
• Water supply: retractable water tank, waste water in collection tray (below)
• Doors: 2 x full door, snap closure, rotary handle per door, door stop left, not changeable
• Type of energy: electric
• Connection: 10.15 kW, 400 V, 3N, 50 Hz
• Hedging: 14,7 A
• Protection class: IPX4 (splashproof)
• Insulation: energy-saving insulation, up to 35 mm
• External facing: CHR 1.4016
• Internal facing: CNS 1.4301
• Weight: 157 kg net
• Country of origin: Italy

• Large capacity: 16 x GN 2/1 or 32 x GN 1/1
• 115 kg product quantity per cycle
• Can be driven on 4 wheels Ø 150 mm, of which 2 with brakes
• Decreaseable water tank, waste water in collection tray
• LED touch screen 4.3 inch, multilingual
• Time, temperature and humidity control with start delay
• Circulating rubber floor strip and ergonomic sliding handles

Notes on establishment and operation

The connection to 400 V three-phase current must be made by an electric specialist. GN container is not included.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: Moduline S.R.L., Via dell' Industria 11, 31029 Vittorio Veneto (TV), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.