NordCap Regeneration oven RRT 101 E, mobile, for 10 x GN 1/1 or EN 600 x 400, recirculation air, touch screen

Product details

The mobile NordCap regeneration oven RRT 101 E regenerates cooled food on 10 trays for GN 1/1 or EN 600 x 400 – with retractable water tank and touch screen control.

The RRT 101 E is a mobile stand for the regeneration of refrigerated foods, which are used at a temperature of +3 °C. The working temperature range is 30 to 210 °C. The standard, removable mounting frame accommodates 10 x GN 1/1-76 in the transverse insert, alternatively, 20 plates with 200 to 260 mm or 10 plates with 270 to 320 mm diameter can be placed. NordCap gives an output of 36 kg per cycle.

Four 125 mm diameter rollers, two of them with brakes, ergonomic handles for pushing and a circumferential rubber floor strip make the device movable and protect it in everyday operation. The electronic control in the front panel has a multilingual 4.3-inch LED touch screen, main switch and start/stop button. Time, temperature and humidity are controlled, and start delay is possible. At the end of the cycle, an acoustic signal, a temperature lowering and the warm-up function follow.

The full door with snap closure, rotary handle and heat and ageing resistant seal is hit on the left, the stop can be changed at extra cost on the factory side. The CNS 1.4301 interior has rounded corners, the frame can be removed for cleaning and the maintenance components are easily accessible. The exterior cladding consists of CHR 1.4016, the energy-saving insulation is up to 35 mm thick.

A retractable water tank ensures moisture, the waste water is collected at the bottom of a collection tray. It is heated by a recirculation air heating system with autoreverse fan wheel operation and safety thermostat, and a vent valve sits in the top plate. The connection is connected to 400 V (3N, 50 Hz) with 6.80 kW and a protection of 9.9 A, the protection class is IPX4. Optionally available are core temperature sensors, the climachef system for automatic humidity control, a glass door with separate lighting and frame frames for 8 x GN 1/1 or 1. 8 x EN 600 x 400 with 96 mm slot spacing.

• 1 x regeneration furnace RRT 101 E, mobile
• 1 x mounting frame, removable, for 10 x GN 1/1, insert distance 76 mm
• 4 x castors Ø 125 mm, of which 2 with brakes

• Manufacturer item number: 437051101
• Installation type: Stand-up device (mobile)
• Suitability: for regenerating chilled food
• Recording (optional): 10 x GN 1/1-76 (reels across), 20 x plate Ø 200 to 260 mm, 10 x plate Ø 270 to 320 mm
• Frame frame (standard): for 10 x GN 1/1, insert distance 76 mm
• Power: 36 kg Product quantity per cycle
• Input temperature: +3 °C
• Working temperature: 30 to 210 °C
• External dimensions (W x D x H): 880 x 825 x 1310 mm
• Depth at open door: 1533 mm
• Control: electronic (in front panel), LED display 4.3 inch, touch screen, multilingual
• Control: time, temperature, humidity; start delay, warm holding function
• Heating: recirculation air, autoreverse fan wheel operation, safety thermostat
• Water supply: retractable water tank, waste water in collection tray (below)
• Door: 1 x full door, snap closure, rotary handle, door stop left
• Type of energy: electric
• Connection: 6,80 kW, 400 V, 3N, 50 Hz
• Hedging: 9,9 A
• Protection class: IPX4 (splashproof)
• Insulation: energy-saving insulation, up to 35 mm
• External facing: CHR 1.4016
• Internal facing: CNS 1.4301
• Weight: 119 kg net
• Country of origin: Italy

• Can be driven on 4 wheels, of which 2 with brakes
• Decreaseable water tank, waste water in collection tray
• Circulating rubber floor strip and ergonomic sliding handles
• LED touch screen 4.3 inch, multilingual
• Time, temperature and humidity control with start delay
• Temperature lowering and holding function at the end of the cycle
• Optionally GN 1/1 or plate

Notes on establishment and operation

The connection to 400 V three-phase current must be made by an electric specialist. GN container is not included.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: Moduline S.R.L., Via dell' Industria 11, 31029 Vittorio Veneto (TV), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.