NordCap Regeneration oven RRO 101 E for 10 x GN 1/1 or EN 600 x 400, recirculating air, 30 to 210 °C, touch screen

Product details

The NordCap regeneration oven RRO 101 E reliably brings cooled and frozen food to 10 trays for GN 1/1 or EN 600 x 400 by air.

The RRO 101 E is designed as a tableware for the regeneration of chilled and frozen food. The food can be fed into the cooking room with a temperature of -18 to +3 °C, the working temperature ranges from 30 to 210 °C. As standard, the removable mounting frame accommodates 10 x GN 1/1-76 in the transverse insert, alternatively, 20 plates with 200 to 260 mm or 10 plates with 270 to 320 mm diameter can be regenerated. NordCap specifies the power with 36 kg product quantity per cycle.

The oven is operated via an electronic control system in the front panel with 4.3 inch LED touch screen, which operates multilingually. Main switch and start/stop button are directly accessible, time, temperature and humidity are controlled. A start delay is possible, at the end of the cycle an acoustic signal sounds. After that, the device lowers the temperature and keeps the food ready with the warm-up function until it is issued.

The full door closes with snap closure and heat and aging resistant seal, it is opened by a rotary handle. When the door is opened, the fan wheel is parked. The door stop is left and can be changed at an additional cost on the factory side. The interior of CNS 1.4301 has rounded corners, the frame can be removed for cleaning and the maintenance components are easily accessible. Outside the unit is covered with CHR 1.4016, an energy-saving insulation with up to 35 mm thickness keeps the heat in the cooking room.

The circulating air heating system works with autoreverse fan wheel operation, a vent valve sits in the cover plate, a safety thermostat is installed. For the moisture a built-in water connection with 1.5 to 5 bar water pressure is necessary, the water runs over the central cooking room drain. Electrically, the RRO 101 E is connected to 400 V (3N, 50 Hz) with 12.50 kW connection value and a protection of 18.1 A, the protection class is IPX4. Optionally available are core temperature probes, the climachech system for automatic humidity control, a glass door with separate lighting, a USB interface for reading HACCP data, and frame frames for 8 x GN 1/1 or 8 x EN 600 x 400 with 96 mm slot spacing.

• 1 x regeneration oven RRO 101 E
• 1 x mounting frame, removable, for 10 x GN 1/1, insert distance 76 mm
• 4 x Footsets

• Manufacturer item number: 437050101
• Position type: tableware
• Suitability: for the regeneration of chilled and frozen food
• Recording (optional): 10 x GN 1/1-76 (reels across), 20 x plate Ø 200 to 260 mm, 10 x plate Ø 270 to 320 mm
• Frame frame (standard): for 10 x GN 1/1, insert distance 76 mm
• Power: 36 kg Product quantity per cycle
• Input temperature: -18 to +3 °C
• Working temperature: 30 to 210 °C
• External dimensions (W x D x H): 800 x 822 x 1155 mm
• Depth at open door: 1533 mm
• Control: electronic (in front panel), LED display 4.3 inch, touch screen, multilingual
• Control: time, temperature, humidity; start delay, warm holding function
• Heating: recirculation air, autoreverse fan wheel operation, safety thermostat
• Door: 1 x full door, snap closure, rotary handle, door stop left
• Type of energy: electric
• Connection: 12.50 kW, 400 V, 3N, 50 Hz
• Hedging: 18,1 A
• Water connection: construction side, water pressure 1.5 to 5 bar
• Protection class: IPX4 (splashproof)
• Insulation: energy-saving insulation, up to 35 mm
• External facing: CHR 1.4016
• Internal facing: CNS 1.4301
• Weight: 93 kg net
• Country of origin: Italy

• Regenerating chilled and frozen food (input temperature -18 to +3 °C)
• LED touch screen 4.3 inch, multilingual
• Time, temperature and humidity control with start delay
• Temperature lowering and holding function at the end of the cycle
• Fan wheel stops when opening the door
• Optionally GN 1/1 or plate
• Interior with rounded corners, frame removable

Notes on establishment and operation

A minimum distance of 100 mm must be observed on the sides and on the rear wall. A water connection (1.5 to 5 bar) is required for the operation. The connection to 400 V three-phase current must be made by an electric specialist force. GN container is not included.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: Moduline S.R.L., Via dell' Industria 11, 31029 Vittorio Veneto (TV), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.