NordCap Regeneration oven RRO 061 E for 6 x GN 1/1 or EN 600 x 400, recirculating air, 30 to 210 °C, touch screen

Product details

The NordCap regeneration oven RRO 061 E reliably brings cooled and frozen food to 6 trays for GN 1/1 or EN 600 x 400 via air circulation to serving temperature.

The RRO 061 E is designed as a tableware for the regeneration of refrigerated and frozen food. The food can be fed into the cooking room with a temperature of -18 to +3 °C, the working temperature range ranges from 30 to 210 °C. As standard, the removable mounting frame accommodates 6 x GN 1/1-78 in the transverse insert, alternatively 12 plates with 200 to 260 mm or 6 plates with 270 to 320 mm diameter can be regenerated. NordCap specifies the power with 22 kg product quantity per cycle.

The oven is operated via an electronic control system in the front panel with 4.3 inch LED touch screen, which operates multilingually. Main switch and start/stop button are directly accessible, time, temperature and humidity are controlled. A start delay is possible, at the end of the cycle an acoustic signal sounds. After that, the device lowers the temperature and keeps the food ready with the warm-up function until it is issued.

The full door closes with snap closure and heat and aging resistant seal, it is opened by a rotary handle. When the door is opened, the fan wheel is parked. The door stop is left and can be changed at an additional cost on the factory side. The interior of CNS 1.4301 has rounded corners, the frame can be removed for cleaning and the maintenance components are easily accessible. Outside the unit is covered with CHR 1.4016, an energy-saving insulation with up to 35 mm thickness keeps the heat in the cooking room.

The circulating air heating system works with autoreverse fan wheel operation, a vent valve sits in the cover plate, a safety thermostat is installed. For the moisture a built-in water connection with 1.5 to 5 bar water pressure is necessary, the water runs over the central cooking room drain. Electrically, the RRO 061 E is connected to 400 V (3N, 50 Hz) with a connection value of 6.30 kW and a protection of 9.2 A. The protection rating is IPX4. Optionally available are core temperature sensors, the climachech system for automatic moisture control, a glass door with separate lighting, a USB interface for reading HACCP data and frame frames for 5 x GN 1/1 or 5 x EN 600 x 400 with 93 mm slot spacing.

• 1 x regeneration furnace RRO 061 E
• 1 x mounting frame, removable, for 6 x GN 1/1, slot spacing 78 mm
• 4 x Footsets

• Manufacturer item number: 437050061
• Position type: tableware
• Suitability: for the regeneration of chilled and frozen food
• Recording (optional): 6 x GN 1/1-78 (reels across), 12 x plate Ø 200 to 260 mm, 6 x plate Ø 270 to 320 mm
• Frame frame (standard): for 6 x GN 1/1, slot spacing 78 mm
• Power: 22 kg Product quantity per cycle
• Input temperature: -18 to +3 °C
• Working temperature: 30 to 210 °C
• External dimensions (W x D x H): 800 x 822 x 855 mm
• Depth at open door: 1533 mm
• Control: electronic (in front panel), LED display 4.3 inch, touch screen, multilingual
• Control: time, temperature, humidity; start delay, warm holding function
• Heating: recirculation air, autoreverse fan wheel operation, safety thermostat
• Door: 1 x full door, snap closure, rotary handle, door stop left
• Type of energy: electric
• Connection: 6.30 kW, 400 V, 3N, 50 Hz
• Hedging: 9,2 A
• Water connection: construction side, water pressure 1.5 to 5 bar
• Protection class: IPX4 (splashproof)
• Insulation: energy-saving insulation, up to 35 mm
• External facing: CHR 1.4016
• Internal facing: CNS 1.4301
• Weight: 71 kg net
• Country of origin: Italy

• Regenerating chilled and frozen food (input temperature -18 to +3 °C)
• LED touch screen 4.3 inch, multilingual
• Time, temperature and humidity control with start delay
• Temperature lowering and holding function at the end of the cycle
• Fan wheel stops when opening the door
• Optionally GN 1/1 or plate
• Interior with rounded corners, frame removable

Notes on establishment and operation

A minimum distance of 100 mm must be observed on the sides and on the rear wall. A water connection (1.5 to 5 bar) is required for the operation. The connection to 400 V three-phase current must be made by an electric specialist force. GN container is not included.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: Moduline S.R.L., Via dell' Industria 11, 31029 Vittorio Veneto (TV), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.