NordCap Gas bain-marie GWB9 / 1B-GN1/1-T, series EVO 900, for 1 x GN 1/1 to 150 mm, tabletop unit, 3,00 kW

Product details

The NordCap Gas-bain-marie GWB9 / 1B-GN1/1-T from the series EVO 900 is a tabletop unit with deep-drawn, jointless basin for 1 x GN 1/1 to 150 mm and a working temperature of 30 to 90 °C.

The GWB9 / 1B-GN1/1-T is a gas-heated bain-marie from the NordCap series EVO 900 and is supplied as a tabletop device. The basin takes up a GN container 1/1 with a height of up to 150 mm, the basin dimensions are 305 x 685 x 160 mm (W x D x H). The working temperature can be used in the range of 30 to 90 °C. The optional accessories such as the shelf are matched to 400 mm elements.

The basin has a GN container support. Matching GN container 1/1 from CNS in heights 65, 100 and 150 mm are optionally available, as well as a shelf for Bain-Maries with 280 x 500 x 20 mm (W x D x H). In addition, a tap for the water bath made of stainless steel with 50 x 130 x 200 mm (W x D x H) is optionally available.

The basin is deep drawn and seamless, which makes cleaning easier. It is emptied via a drain with overflow pipe. Front and cover plate are made of CNS with 2 mm thickness, side and rear wall made of stainless steel with scotch british finish and rounded edges on the side. The protection class IPX5 protects the device against jet water.

The bain-marie is heated with gas via a CNS burner with Piezo gun and flame monitor, the connection value is 3,00 kW. The unit is equipped with natural gas nozzles from the factory, and a conversion kit to liquefied gas nozzles is optionally available. The outside dimensions are 400 x 900 x 250 mm (W x D x H) with a width of 400 mm in the EVO 900 series grid. The net weight is 32 kg, the bain-marie is produced in Italy.

• 1 x gas bain-marie GWB9 / 1B-GN1/1-T

• Manufacturer item number: 406392109
• Series: EVO 900
• Position type: tableware
• Energy type: Gas
• Recording: 1 x GN 1/1-150
• Basin: 1 x basin, deep drawn, seamless, with support for GN container
• Pool dimensions (W x D x H): 305 x 685 x 160 mm
• Working temperature: 30 to 90 °C
• Flow: over overflow pipe
• Connection gas: 3,00 kW, natural gas nozzles (conversion kit to liquefied gas optional)
• Heating: CNS burner, Piezo detonation, flame monitor
• External dimensions (W x D x H): 400 x 900 x 250 mm
• External facing: CNS front and deck panel, 2 mm; side and rear wall stainless steel, Scotch-Brite finish, round edges
• Protection class: IPX5 (pollution-protected)
• Weight: 32 kg net
• Country of origin: Italy

• Deep drawn jointless basin for 1 x GN 1/1 to 150 mm
• Working temperature 30 to 90 °C
• Flow over overflow tube
• Gas heating with CNS burner, piezo detonation and flame monitor
• Ex works with natural gas nozzles, conversion kit to liquefied gas optional
• Front and cover plate made of 2 mm CNS, protection class IPX5
• GN container, shelf and faucet optionally available

Notes on establishment and operation

The unit is equipped with natural gas nozzles ex factory; a conversion kit to LPG nozzles is available as a special accessory. The gas connection must be made by a specialized company.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: ZANUSSI PROFESSIONAL, Viale Treviso 15, 33170 Pordenone, Italy (trade mark holder: stock bullage Electrolux, 105 45 Stockholm, Sweden)
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.