NordCap Electricgriddle EBP9 / 1H-GL-GE-V-T, series EVO 900, smooth chrome finish polished, tableware, 400 V

Product details

The NordCap Electricgriddle EBP9 / 1H-GL-GE-V-T from the EVO 900 series is a tabletop device with a polished, smooth chrome-brat surface, designed for gentle roasting with low adhesion.

The EBP9 / 1H-GL-GE-V-T is an electrically heated griddle from the NordCap series EVO 900 and is supplied as a tabletop device. It is equipped with a polished, smooth chrome finish. It is suitable for the gentle roasting of sensitive foods with low adhesion and even heat transfer, especially for fish, poultry, fine vegetables and fried potatoes. The plate dimensions are 330 x 700 mm (W x D), the outer dimensions are 400 x 930 x 410 mm (W x D x H). With a width of 400 mm, the device fits into a cooking line of the EVO 900 series.

The griddle is electrically heated with a connection value of 7.50 kW. The frying surface has a heating zone with thermostatic temperature control, the working temperature ranges from 120 to 280 °C. The heating zones are divided into two horizontal cooking zones: Due to lower working temperature, the front area is suitable for slower cooking of the food. Thus, different temperature ranges are available on a frying surface.

The frying surface is deep drawn and tilted for the fat flow by 1.5° forward, through the fat flow opening with stopper the fat enters into the fat collection container under the griddle. Front and deck panels are made of stainless steel (CNS) with 2 mm thickness, side and rear wall made of stainless steel with Scotch-Brite finish and rounded edges on the side. With the protection class IPX5 the device is protected against jet water. The standard accessories include a grease drain tray, a smooth scraper and a three-sided spray protection made of stainless steel.

The body measures 400 x 915 x 251 mm (W x D x H), the height with feet is 275 mm, the four feet are adjustable. When the drawer is open, the depth is 1045 mm. The griddle is connected to 400 V, 3N, 50 Hz with 7.50 kW. The net weight is 55 kg, the griddle is produced in Italy. A scraper for smooth frying plates is optionally available as a replacement.

• 1 x electric griddle EBP9 / 1H-GL-GE-V-T
• 1 x fat drain tray
• 1 x scraper, smooth
• 1 x spray protection, 3-sided, stainless steel
• 4 x feet, adjustable

• Manufacturer item number: 406392072
• Series: EVO 900
• Position type: tableware
• Type of energy: electric
• frying surface: 1 x chrome finish, polished, smooth
• Plate dimensions (W x D): 330 x 700 mm
• Heating zones: 1
• Working temperature: 120 to 280 °C
• Grease: deep frying surface, 1.5° inclined forward, fat flow opening with stopper, fat collection container
• Connection: 7.50 kW, 400 V, 3N, 50 Hz
• External dimensions (W x D x H): 400 x 930 x 410 mm
• Body dimensions (W x D x H): 400 x 915 x 251 mm
• Height with feet: 275 mm
• Depth with open drawer: 1045 mm
• External facing: CNS front and deck panel, 2 mm; side and rear wall stainless steel, Scotch-Brite finish, round edges
• Protection class: IPX5 (pollution-protected)
• Weight: 55 kg net
• Country of origin: Italy

• Polished, smooth chrome frying surface for gentle roasting with low adhesion
• Thermostatic control, 120 to 280 °C
• Front area with lower working temperature for cooking
• Deep-drawn frying surface, 1.5° forward inclined for the fat flow
• Fat flow opening with stopper and fat collection container
• Three-sided spray protection made of stainless steel in series accessories

Notes on establishment and operation

Connection to 400 V three-phase current by an electrician.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial cooking appliances are currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: ZANUSSI PROFESSIONAL, Viale Treviso 15, 33170 Pordenone, Italy (trade mark holder: stock bullage Electrolux, 105 45 Stockholm, Sweden)
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.