NordCap hood dishwasher ZHT8EG, insert height 440 mm, up to 80 baskets/h, suction pump, 400 V

Product details

The NordCap ZHT8EG hood dishwasher cleans dishes, pots, pans and GN containers with 440 mm insert height – with a lukewarm pump as well as flush and rinse fluid dosing as standard.

The ZHT8EG is a single wall hood dishwasher for restaurants, large kitchens, factory canteens, hospitals, care facilities, production kitchens and community catering. It cleans dishes, pots, pans, kitchen utensils and gastronorm container and is also suitable for glasses and cutlery. The insert height is 440 mm. Theoretically, the machine can produce up to 80 baskets or 1440 plates per hour, 63 baskets per hour in ETL mode and 1134 plates respectively.

The ZHT8EG is operated via an electronic control system with digital display, start button and pictogram control. Three flushing programs, a soft-start function and an automatic self-cleaning program are available. The green "Wash Safe Control" indicator reports the proper re-surge, flushing and rinse detergents are automatically re-dosed and re-dosed each washing cycle. Boiler performance can be adjusted via the control panel without opening the machine. A self-diagnosis system is integrated, the machine is pre-equipped for HACCP and energy management systems. The hood is manually operated via the three-sided hood handle, while opening the hood, the flushing cycle can be interrupted at any time.

Housing and interior are made of stainless steel CNS 1.4301, rear wall and underbody are closed. The wash tank is deep drawn on the front side, the sloping wash arms avoid a backdrop of the washing water. Wash and afterwash arms made of stainless steel can be removed for cleaning. A dry run and water deficiency protection secures the heating elements. The protection class IP25 protects against jet water, the noise level is about 68 dB.

The integrated atmospheric boiler with adjustable heating holds 12 litres at 9.00 kW, the tank 24 litres at 3.00 kW, the water consumption is 2.00 litres. A lukewarm pump is installed as standard, a pressure increase pump is optionally available. The machine is connected to 400 V (3N, 50 Hz) with 9.90 kW. The cold water supply with adjustable water flow is designed for 10 to 20 °C at 0.5 to 7 bar and a water hardness up to 8 °dH, the water flow with Ø 20,5 mm is arranged below.

• 1 x ZHT8EG hood dishwasher
• 1 x plate basket, plastic, yellow, for up to 18 plates or 27 saucers, 500 x 500 x 105 mm
• 2 x cutlery container, yellow, 110 x 110 x 150 mm
• 4 x feet, stainless steel, height adjustable

• Manufacturer item number: 406504299
• Insert height: 440 mm
• Theoretical power: up to 80 baskets/h (ETL: 63), up to 1440 plates/h (ETL: 1134)
• Rinsing programs: 3
• Rinse temperature: 55 to 65 °C, Rinse temperature: 84 °C
• Boiler capacity: 12 l (9,00 kW), atmospheric boiler, tank capacity: 24 l (3,00 kW)
• Water consumption: 2,00 l
• External dimensions (W x D x H): 746 x 970 x 2273 mm
• Connection: 9,90 kW, 400 V, 3N, 50 Hz
• Water supply: cold water 10 to 20 °C, water pressure 0.5 to 7 bar
• Water flow: Ø 20,5 mm, arranged below
• Water hardness: up to 8 °dH (water softener only externally)
• Dishes: Series, Dishes: Series
• Lugen pump: series, pressure increase pump: optional
• Defect diagnosis system: series, cleaning system: series
• Protection class: IP25 (pollution-protected)
• Noise level: approx. 68 dB
• Outside facing: CNS 1.4301, rear wall and underbody closed
• Internal facing: CNS 1.4301
• Installation type: Stand-up equipment
• Weight: 150 kg net
• Country of origin: Italy

• Standard lye pump as well as rinsing and rinsing agent dosing with automatic initial and subsequent dosing
• "Wash Safe Control" display for proper flushing
• Boiler power can be adjusted via the control panel without opening the machine
• Automatic self-cleaning program and self-diagnosis system
• Pre-equipped for HACCP and energy management system
• Three-sided hood handle, flushing cycle by hood opening at any time interruptible
• Dry run and water deficiency protection for the heating elements

Notes on establishment and operation

Connection to 400 V three-phase current by an electrical specialist. On the construction side, a cold water supply (10 to 20 °C, 0.5 to 7 bar) with installed cold water tap and a water drain (Ø 20,5 mm, located below) are required. The machine is designed for a water hardness up to 8 °dH, a water softener is only possible externally.

Operating instructions

Download user manual (PDF)

Note on warranty

According to NordCap manufacturer, only the fully completed and returned to NordCap commissioning protocol flushing technology entitles the warranty claim. On request, the dishwasher can be professionally put into operation and washed in on-site by a service partner authorized by NordCap; this additional service from NordCap will be charged at a flat rate.

Energy labelling

Commercial dishwashers are currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: ZANUSSI PROFESSIONAL, Viale Treviso 15, 33170 Pordenone, Italy (trade mark holder: stock bullage Electrolux, 105 45 Stockholm, Sweden)
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.