NordCap Gas hotplate stove GGH9 / 2F-GB-UO-S, EVO 900, hotplate, 2 flames, gas brat furnace, cabinet

Product details

The NordCap GGH9 / 2F-GB-UO-S gas hotplate stove combines a cast iron hotplate, two open flower flame gas burners, a gas blast furnace and a cabinet compartment in a 1200 mm wide stand-up unit of the EVO 900 series.

The GGH9 / 2F-GB-UO-S is a gas hotplate stove from the NordCap series EVO 900 and is designed as a stand-up device. It is suitable for cooking, frying, sautéing, simmering and keeping warm on a combination of annealing plate and open gas burners. The 10.50 kW hot plate field is made of solid cast iron (795 x 696 mm), stores a lot of heat and forms a natural temperature range of up to 500 °C in the centre and approx. 200 °C in the edge areas. In addition, a Flower flame gas burner with 10.00 kW and one with 6.00 kW are available. The outer dimensions are 1200 x 900 x 850 mm (W x D x H).

The Flower-Flame gas burners with a diameter of 60 and 100 mm are suitable for pots and pans from approx. 100 to 400 mm in diameter, their performance is infinitely adjustable. They are lit by piezo-ignition with protected ignition flame, thermo-safety elements and flame monitoring ensure high operational safety. In the substructure, a 8.50 kW gas brat furnace for GN 2/1 with thermostatic temperature control from 120 to 280 °C. The cooking room measures 575 x 650 x 300 mm, offers three insert levels for GN-2/1 sheet and a ribbed cast iron floor plate, the double-walled oven door is thermally insulated. A cabinet compartment with door (335 x 740 x 350 mm) complements the underbody.

Front and top panels are made of CNS with 2 mm material thickness. The exterior cladding is made of stainless steel with Scotch-Brite finish and rounded edges on the side. The oven is covered inside with CHR 1.4016. The protection class IPX5 protects the device against jet water.

The total gas connection value is 35.00 kW. The stove is manufactured in natural gas version, conversion to liquefied gas is possible, the liquefied gas nozzle set is optionally available. Also optionally available are a gas pressure regulator, a cooking plate for 1 burner, a grooved grid plate for single burners and a sliding grating made of stainless steel over 2 burners. The weight is 207 kg net, the stove is produced in Italy.

• 1 x GGH9 / 2F-GB-UO-S gas burner
• 1 x rust GN 2/1, chromed (for the gas brat furnace)

• Manufacturer item number: 406392021
• Series: EVO 900
• Installation type: Stand-up equipment
• Energy type: Gas
• hobs: 1 x 10.50 kW incandescent plate field, 1 x 10.00 kW and 1 x 6.00 kW flower flame gas burner
• Plate dimensions (W x D): 795 x 696 mm
• Burner diameter: 60 / 100 mm
• Substructure: 1 x gas brat stove 8,50 kW, GN 2/1, 1 x cabinet compartment with door
• Working temperature oven: 120 to 280 °C (thermostatic)
• External dimensions (W x D x H): 1200 x 900 x 850 mm
• Body dimensions (W x D x H): 1200 x 900 x 700 mm
• Furnace dimensions (W x D x H): 575 x 650 x 300 mm
• Cabinet dimensions (W x D x H): 335 x 740 x 350 mm
• Connection value gas: 35,00 kW
• Gas type ex works: natural gas (conversion to liquefied gas possible)
• Front and cover plate: CNS, 2 mm
• exterior facing: stainless steel, Scotch-British finish, round edges
• Internal cladding: CHR 1.4016
• Protection class: IPX5 (pollution-protected)
• Weight: 207 kg net
• Country of origin: Italy

• Cast iron hot plate with temperature zones of up to 500 °C up to approx. 200 °C
• Two Flower-Flame gas burners with 10.00 kW and 6.00 kW, infinitely adjustable
• Gas brat furnace GN 2/1 with thermostatic regulation from 120 to 280 °C
• Additional cabinet compartment with door in the underbody
• Double walled, heat-insulated oven door
• Piezo detonation, thermo-safety elements and flame monitoring

Notes on establishment and operation

According to the set-up requirements for commercial gas appliances (DVGW G 631), a discharge of the exhaust gases via the kitchen ventilation system is required for cooking appliances with a connection value of 14 kW or more. A liquefied gas nozzle set and a gas pressure regulator are not included and are optionally available.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial gas stoves are currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: ZANUSSI PROFESSIONAL, Viale Treviso 15, 33170 Pordenone, Italy (trade mark holder: stock bullage Electrolux, 105 45 Stockholm, Sweden)
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.