NordCap Gas stove GH9 / 6F-GB-S, series EVO 900, 6 flames, gas furnace GN 2/1, cabinet, 1200 mm

Product details

The NordCap gas stove GH9 / 6F-GB-S combines six flower flame gas burners, a gas furnace for GN 2/1 and a cabinet compartment with door in a 1200 mm wide stand-up unit of the EVO 900 series.

The GH9 / 6F-GB-S is a gas stove from the NordCap series EVO 900 and designed as a 1200 mm wide stand-up unit. Six flower flame gas burners are available on the lift: two with 10.00 kW each and four with 6.00 kW each. The burner diameters are 60 and 100 mm, according to the manufacturer, the different burner diameters can be flexibly replaced. The outer dimensions are 1200 x 930 x 909 mm (W x D x H).

In the substructure, a gas brat furnace with 8.50 kW works for GN 2/1, its working temperature ranges from 120 to 280 °C. The cooking space measures 575 x 700 x 300 mm, when the flap is open, the device depth is 1309 mm, a chrome-plated GN transformer 2/1 is included. In addition, a cabinet compartment with door (335 x 740 x 350 mm) offers storage space. The stainless steel burners are controlled by gas control valves, a pilot ignition flame, ignition fuse per burner and a self-stabilizing flame support safe operation. Other features include enamelled cast iron and a grooved base plate.

Front and top panels are made of stainless steel (CNS) with 2 mm material thickness, side and rear panels are made of stainless steel with Scotch-Brite finish and rounded edges on the side. The CNS pot gratings are dishwasher-compatible and can be cleaned without any problems. The oven is covered inside with CHR 1.4016. With the IPX5 protection class, the device is water-resistant. Four height adjustable feet from CNS with a height of 150 to 250 mm are standard equipment and facilitate alignment in the cooking line.

The total gas connection value is 52.50 kW. The stove is equipped with natural gas nozzles. An optional conversion kit for LPG nozzles is available. Optionally available for the EVO 900 series are also a cooking plate for 1 burner, a grooved grid plate for single burners and a sliding grating made of stainless steel over 2 burners. The weight is 155 kg net, the stove is produced in Italy.

• 1 x gas stove GH9 / 6F-GB-S
• 1 x GN-tragrost 2/1, chromed, 650 x 530 mm
• 4 x feet, CNS, height adjustable, 150 to 250 mm

• Manufacturer item number: 406392013
• Series: EVO 900
• Installation type: Stand-up equipment
• Energy type: Gas
• hobs: 2 x 10.00 kW and 4 x 6.00 kW Flower flame gas burner
• Burner diameter: 60 / 100 mm
• Substructure: 1 x gas brat stove 8,50 kW, GN 2/1, 1 x cabinet compartment with door
• Working temperature oven: 120 to 280 °C
• External dimensions (W x D x H): 1200 x 930 x 909 mm
• Body dimensions (W x D x H): 1200 x 900 x 700 mm
• Furnace dimensions (W x D x H): 575 x 700 x 300 mm
• Cabinet dimensions (W x D x H): 335 x 740 x 350 mm
• Depth with open flap: 1309 mm
• Connection value gas: 52,50 kW
• Gas type ex works: Natural gas (conversion kit LPG optional)
• Front and cover plate: CNS, 2 mm
• Outer facing: side and rear wall stainless steel, Scotch-British finish, rounded edges on the side
• Internal cladding: CHR 1.4016
• Protection class: IPX5 (pollution-protected)
• Weight: 155 kg net
• Country of origin: Italy

• Six flower flame gas burners: 2 x 10.00 kW and 4 x 6.00 kW
• Gas brat furnace 8.50 kW for GN 2/1, 120 to 280 °C
• Additional cabinet compartment with door in the underbody
• Stainless steel burner with ignition fuse and self-stabilizing flame
• Different burner diameters, flexibly exchangeable
• Dishwasher-compatible CNS pot grating, protection class IPX5

Notes on establishment and operation

According to the set-up requirements for commercial gas appliances (DVGW G 631), for cooking appliances with a connection value of 14 kW or more, exhaust gases are required via the kitchen ventilation system. A conversion kit to LPG nozzles is not included and is optionally available.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial gas stoves are currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: ZANUSSI PROFESSIONAL, Viale Treviso 15, 33170 Pordenone, Italy (trade mark holder: stock bullage Electrolux, 105 45 Stockholm, Sweden)
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.