NordCap Gas stove GH9 / 4F-EB-S, series EVO 900, 4 flames, electro-brade GN 2/1, 400 V

Product details

The NordCap gas stove GH9 / 4F-EB-S combines four flower flame gas burners with an electrically heated oven for GN 2/1 with separately switchable top and bottom heat.

The GH9 / 4F-EB-S is a stand-up device from the NordCap series EVO 900 that connects gas and electrical engineering. On the lift, a Flower-Flame gas burner with 10.00 kW and three Flower-Flame gas burners with 6.00 kW each are available. The burner diameters are 60 and 100 mm, according to the manufacturer, the different burner diameters can be flexibly replaced. The outer dimensions are 800 x 930 x 909 mm (W x D x H).

In the substructure, an electro-brate furnace with 6.00 kW works for GN 2/1 and a working temperature of 110 to 285 °C. The upper and lower heat can be switched on separately, in addition to the grill and combination are available for choice. The furnace measures 575 x 700 x 300 mm inside, when the valve is open, the device depth is 1309 mm, a chrome-plated GN-Tragrost 2/1 is included. The burners are controlled by gas control valves, ignited by a pilot gun flame. Other features are enamelled cast iron and a ribbed base plate.

Front and top panels are made of stainless steel (CNS) with 2 mm material thickness, side and rear panels are made of stainless steel with Scotch-Brite finish and rounded edges on the side. The CNS pot gratings are dishwasher-compatible and can be cleaned without any problems. The oven is covered inside with CHR 1.4016. With the IPX5 protection class, the device is water-resistant. Four height adjustable feet from CNS with a height of 150 to 250 mm are standard equipment and facilitate alignment in the cooking line.

The connection value of gas is 28.00 kW, the electric brat furnace is connected to 400 V (3N, 50 Hz) with 6.00 kW. The stove is equipped with natural gas nozzles. An optional conversion kit on liquefied gas nozzles is available. Optionally available for the EVO 900 series are a cooking plate for 1 burner, a grooved grid plate for single burners and a sliding grating made of stainless steel over 2 burners, and an additional chrome plated GN-Rost 2/1 (650 x 530 mm) for the series furnaces. The weight is 123 kg net, the stove is produced in Italy.

• 1 x gas stove GH9 / 4F-EB-S
• 1 x GN-tragrost 2/1, chromed, 650 x 530 mm
• 4 x feet, CNS, height adjustable, 150 to 250 mm

• Manufacturer item number: 406392010
• Series: EVO 900
• Installation type: Stand-up equipment
• Type of energy: electric/gas
• hobs: 1 x 10,00 kW and 3 x 6,00 kW Flower flame gas burner
• Burner diameter: 60 / 100 mm
• Substructure: 1 x electric furnace 6,00 kW, GN 2/1
• Oven functions: over/underheat separately switchable, grill, combination
• Working temperature oven: 110 to 285 °C
• External dimensions (W x D x H): 800 x 930 x 909 mm
• Body dimensions (W x D x H): 800 x 900 x 700 mm
• Furnace dimensions (W x D x H): 575 x 700 x 300 mm
• Depth with open flap: 1309 mm
• Connection value gas: 28,00 kW
• Electrical connection value: 6,00 kW, 400 V, 3N, 50 Hz
• Gas type ex works: Natural gas (conversion kit LPG optional)
• Front and cover plate: CNS, 2 mm
• Outer facing: side and rear wall stainless steel, Scotch-British finish, rounded edges on the side
• Internal cladding: CHR 1.4016
• Protection class: IPX5 (pollution-protected)
• Weight: 123 kg net
• Country of origin: Italy

• Four flower flame gas burners: 1 x 10.00 kW and 3 x 6.00 kW
• Electric brat stove GN 2/1 with separately switchable top and bottom heat, grill and combination
• Manual ventilation flap in the oven
• Different burner diameters, flexibly exchangeable
• Pilot gun flame and gas control valve
• Dishwasher-compatible CNS pot grating, protection class IPX5

Notes on establishment and operation

According to the set-up requirements for commercial gas appliances (DVGW G 631), a discharge of the exhaust gases via the kitchen ventilation system is required for cooking appliances with a connection value of 14 kW or more. The connection to 400 V (3N, 50 Hz) is carried out by an electrician. A conversion kit to LPG nozzles is not included and is optionally available.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial gas stoves are currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: ZANUSSI PROFESSIONAL, Viale Treviso 15, 33170 Pordenone, Italy (trade mark holder: stock bullage Electrolux, 105 45 Stockholm, Sweden)
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.