NordCap Electric griddle EBP7 / V2HUO, series EVO 700, 2 smooth chrome surfaces polished, stand, 400 V

Product details

The NordCap Electricgriddle EBP7 / V2HUO from the series EVO 700 is a stand-up unit with two smooth chrome-brat surfaces, polished, for gentle roasting of fish, poultry, fine vegetables and fried potatoes.

The EBP7 / V2HUO is an electrically heated griddle from the NordCap series EVO 700 and is supplied as a stand-up unit with open, three-sided clad base. It is equipped with two smooth chrome frying surfaces, polished. It is suitable for the gentle roasting of sensitive foods with low adhesion and even heat transfer, especially fish, poultry, fine vegetables and fried potatoes. The plate dimensions are 730 x 540 mm (W x D), the outer dimensions are 800 x 730 x 930 mm (W x D x H).

The temperature is controlled thermostatically in the range of 120 to 280 °C. The frying surface has two heating zones. According to the manufacturer, the heating zones are divided into two horizontal cooking zones: The front area is suitable for slower cooking of the food due to lower working temperature. A grease drain tray is part of the standard accessories. The open base offers storage space with internal dimensions of 680 x 640 x 420 mm (W x D x H); a door with 400 mm width (li / re) for open base is optionally available.

The frying surface is made of chrome with 12 mm thickness, smooth and polished. The front and top are made of stainless steel (CNS) with 1.5 mm thickness, the side and back wall are made of stainless steel with Scotch-Brite finish and rounded edges on the side. The protection class IPX4 protects the device against splashing water. The series accessories include a three-sided spray protection made of stainless steel and a smooth scraper. An additional scraper for smooth frying plates is optionally available.

The griddle is connected electrically with 400 V, 3N, 50 Hz with a connection value of 8.40 kW. The body measures 800 x 700 x 700 mm (W x D x H), the height with feet is 850 mm, the four stainless steel feet are height adjustable from 150 to 250 mm. The net weight is 80 kg, the griddle is produced in Italy.

• 1 x electric griddle EBP7 / V2HUO
• 1 x fat drain tray
• 1 x scraper, smooth
• 1 x spray protection, 3-sided, stainless steel
• 4 x feet, CNS, height adjustable (150 to 250 mm)

• Manufacturer item number: 406372196
• Series: EVO 700
• Installation type: Stand-up equipment
• Type of energy: electric
• Frying surface: 2 x chrome-brat surface, smooth, polished, thickness 12 mm
• Plate dimensions (W x D): 730 x 540 mm
• Heating zones: 2
• Working temperature: 120 to 280 °C
• Connection: 8,40 kW, 400 V, 3N, 50 Hz
• Control: thermostatic temperature control
• External dimensions (W x D x H): 800 x 730 x 930 mm
• Body dimensions (W x D x H): 800 x 700 x 700 mm
• Height with feet: 850 mm
• Substructure: open on the operating side, 3-sided cladding, inside dimensions (W x D x H) 680 x 640 x 420 mm
• External facing: CNS front and cover plate, 1.5 mm; side and rear wall stainless steel, Scotch-British finish, round edges
• Protection class: IPX4 (splashproof)
• Weight: 80 kg net
• Country of origin: Italy

• Smooth, polished chrome frying surface for gentle roasting with low adhesion
• Chromium frying surface with 12 mm thickness, working temperature 120 to 280 °C
• Thermostatic temperature control
• Front cooking zone with lower temperature for cooking
• Three-sided spray protection made of stainless steel in series accessories
• Open base with storage space, door optionally available
• Protection class IPX4, side and rear wall with rounded edges

Notes on establishment and operation

The connection to 400 V three-phase current shall be made by an electric specialist.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial cooking appliances are currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: ZANUSSI PROFESSIONAL, Viale Treviso 15, 33170 Pordenone, Italy (trade mark holder: stock bullage Electrolux, 105 45 Stockholm, Sweden)
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.