Saro Countertop cooling front + rear sliding doors SELF 205K

Product details

The Saro Countertop cooling SELF K is designed for refrigerated presentation and self-service in catering, buffet area, canteen, café, bakery or sales environment. By sliding doors on the front and back, they are particularly suitable for areas with double-sided access.

The case is made of stainless steel, sides and viewing windows made of tempered glass. The display cases are double glazed on four sides and offer a good view of the presented products.

Two height-adjustable, chrome-plated rusts allow a flexible arrangement of the goods. The LED interior lighting above supports a clear presentation in the interior.

Digital temperature control, recirculation and automatic defrosting are tailored to regular commercial use. The series works in the temperature range from 0 to +12 °C and is available in different sizes.

Product advantages

• 4-seitig doppelt verglast
• 2 height-adjustable gratings, chromed, 1 x W 1156 x D 335 mm, 1 x W 1156 x D 367 mm
• LED interior lighting, top
• Digital temperature control
• Front and rear sliding doors
• Circular air cooling

Technical data

• Material: (case) stainless steel, (sides, viewing window) tempered glass, (door frame) plastic
• 4-seitig doppelt verglast
• 2 height-adjustable gratings, chromed, 1 x W 1156 x D 335 mm, 1 x W 1156 x D 367 mm
• LED interior lighting, top
• Digital temperature control
• Front and rear sliding doors
• Circular air cooling
• Automatic defrosting
• Suitable for climate class: 4
• Temperature range: 0 / +12 °C
• Connection: 230 V - 50 Hz - 0.360 kW
• Contents (gross/net): 200 / 156 L
• Internal dimensions: W 1182 x D 480 x H 410 mm
• External dimensions: W 1219 x D 568 x H 686 mm
• Weight (net/gross): 90 / 94 kg
• Refrigerants: R290
• Energy efficiency class: C (Spectrum A to G)
• NO on-site service

Service

No on-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

Manufacturer: Saro Gastro-Products GmbH - Sandbahn 6 - 46446 Emmerich am Rhein - GERMANY / GERMANY - info@saro.de - www.saro.de

EU responsible person: Not required. Manufacturer is located in the EU.

• Place the device exclusively on a stable, horizontal and non-slip surface.
• Ensure that the mains voltage matches the information on the type plate.
• Before first use, all packaging materials and protective films must be removed completely.
• After transport, leave the device upright for at least 12 hours before it is switched on to avoid damage to the refrigerant circuit.
• Ensure that the vents are not blocked to ensure optimum air circulation and cooling.
• The device must not be placed near heat sources or direct sunlight.
• Bottles of high alcohol content must be tightly closed and stored upright in the appliance.
• Electrical devices or heating sources shall not be used in the device.
• Never clean with water jet or high pressure cleaner to avoid electric shock and short circuit risk.
• Damaged cables or plugs may not be used. Replacements may only be made by qualified personnel.
• Before any cleaning, maintenance or repair, turn off the device and disconnect it from the power grid.
• Clean the door seal only with water and make sure it remains intact to avoid loss of energy.
• The refrigerant is combustible; if the cooling circuit is damaged, air the room well and avoid open flames.
• Children must not use the device unattended or play nearby.
• The device is intended exclusively for the storage of food; any other use can cause damage and affect the guarantee.
• Regular cleaning of the capacitor by qualified personnel is recommended to extend the life of the device.
• Be careful when handling the display case (breakable glass). No heavy objects against lean or beat.
• In the event of visible damage or malfunctions, immediately adjust the operation and contact qualified personnel.