NordCap hood dishwasher H8 TIL, double-walled, ESD heat recovery, automatic hood, 400 V

Product details

The NordCap hood dishwasher H8 TIL combines double-walled design and ESD heat recovery with automatic hood operation and up to 80 baskets per hour.

The H8 TIL is a double wall hood dishwasher with automatic hood operation for restaurants, large kitchens, factory canteens, hospitals, care facilities, production kitchens and community catering. It cleans dishes, pots, pans, kitchen utensils and gastronorm containers and is also suitable for glasses and cutlery. The insert height is 440 mm. Theoretically, the machine creates up to 80 baskets or 1440 plates per hour, in ETL mode 63 baskets or 1134 plates.

The core element is the ESD energy saving device with heat exchanger system for heat recovery. The boiler heating is adjustable: Depending on the water supply temperature, the connection value can be reduced by 3 kW. The machine is operated via an electronic pictogram control with three flushing programs plus ETL mode, fault diagnosis system and cleaning system are standard. The hood opens and closes automatically, in addition there is a three-sided hood handle.

The exterior cladding made of stainless steel CNS 1.4301 is double-walled, the rear wall and underbody are closed, the interior is also made of CNS 1.4301. The wash tank is deep-drawn on the front side, wash tank and drain filters can be removed for cleaning, supplemented by a multi-stage filter system. The protection class IP25 protects against jet water, the noise level is about 63 dB.

The atmospheric boiler holds 12 liters at 9.00 kW of heating power, the tank 24 liters. Clean-dryer dosing, pressure booster pump and lukewarm pump are installed as standard. The machine is connected to 400 V (3N, 50 Hz) with 9.90 kW, the water inlet is allowed up to max. 50 °C be warm at 0.5 to 7 bar. The outside dimensions are 667 x 755 x 2273 mm (W x D x H), with open hood 2046 mm height, the net weight is 152 kg.

• 1 x hood dishwasher H8 TIL

• Manufacturer item number: 406504270
• Design: double-walled, automatic hood operation
• Insert height: 440 mm
• Theoretical power: up to 80 baskets/h (ETL: 63), up to 1440 plates/h (ETL: 1134)
• Rinse programs: 3 + ETL mode
• Rinse temperature: 55 to 65 °C, Rinse temperature: 84 °C
• Boiler content: 12 l (9,00 kW), atmospheric boiler, tank capacity: 24 l
• Heat recovery: energy saving device ESD with heat exchanger system
• External dimensions (W x D x H): 667 x 755 x 2273 mm
• Height with open hood: 2046 mm
• Connection: 9,90 kW, 400 V, 3N, 50 Hz
• Water supply: up to max. 50 °C, water pressure 0.5 to 7 bar
• Water softener: no, only external
• Clean-dryer dosing: series
• Pressure booster pump: series, lukewarm pump: series
• Defect diagnosis system: series, cleaning system: series
• Protection class: IP25 (pollution-protected)
• Sound level: approx. 63 dB
• exterior facing: CNS 1.4301, double wall, rear wall and underbody closed
• Internal facing: CNS 1.4301
• Installation type: Stand-up equipment
• Weight: 152 kg net
• Country of origin: Italy

• Energy-saving device ESD with heat exchanger system
• Adjustable boiler heating, connection value can be reduced by 3 kW depending on the inlet temperature
• Automatic hood operation with three-sided hood handle
• Double-walled panelling, rear wall and underbody closed
• Electronic pictogram control, three flushing programs plus ETL mode
• Multi-stage filter system, removable wash tank and drain filters
• Standard pressure booster pump and lukewarm pump

Notes on establishment and operation

Connection to 400 V three-phase current by an electric specialist. On the construction side, a water inlet (up to 50 °C, 0.5 to 7 bar) and a water drain are required, a lukewarm pump is installed. A water softener is only possible externally. The device height is 2273 mm. A front panel with control at the front instead of on the corner is optionally available.

Operating instructions

Download user manual (PDF)

Note on warranty

According to the manufacturer NordCap, only the fully completed and returned commissioning protocol Flushing technology entitles the warranty claim.

Energy labelling

Commercial dishwashers are currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: ZANUSSI PROFESSIONAL, Viale Treviso 15, 33170 Pordenone, Italy (trade mark holder: stock bullage Electrolux, 105 45 Stockholm, Sweden)
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.