Saro Countertop cooling Self Service JULIAN

Product details

The Saro Countertop cooling JULIAN Self Service is intended for use in catering, café, bakery, buffet area, canteen and self-service zones. It is suitable for refrigerated presentation and controlled withdrawal of food or snacks.

Housing, interior and drawer frames are made of stainless steel. Sides and viewing windows are made of tempered glass, the door frame is made of plastic. The two-part sliding door on the back facilitates the fitting.

On the front there are two drawers for the product collection in the self-service area. The separately switchable LED lighting supports a clear presentation of the products.

Digital temperature control, static cooling with recirculating air fan and automatic defrosting are tailored to commercial use. The temperature range is +2 to +10 °C.

Product advantages

• 2-part sliding door at the back
• 2 drawers for product removal at the front
• LED lighting: (inside) 2 x LED (4.8 watts), switchable separately
• Digital temperature control
• Static cooling with air ventilator
• Automatic defrosting

Technical data

• Material: (case, interior, drawer frame) stainless steel, (sides, viewing window) tempered glass, (door frame) plastic
• 2-part sliding door at the back
• 2 drawers for product removal at the front
• LED lighting: (inside) 2 x LED (4.8 watts), switchable separately
• Digital temperature control
• Static cooling with air ventilator
• Automatic defrosting
• Temperature range: +2 / +10 °C
• Connection: 230 V - 50 Hz - 0.360 kW
• Content: (gross/net): 168 / 125 L
• Internal dimensions: W 607 x D 490 x H 450 mm
• External dimensions: W 734 x D 665 x H 798 mm
• Weight (net/gross): 73.5 / 76.5 kg
• Refrigerants: R290
• Energy efficiency class: C (Spectrum A to G)
• NO on-site service

Service

No on-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

Manufacturer: Saro Gastro-Products GmbH - Sandbahn 6 - 46446 Emmerich am Rhein - GERMANY / GERMANY - info@saro.de - www.saro.de

EU responsible person: Not required. Manufacturer is located in the EU.

• Place the device exclusively on a stable, horizontal and non-slip surface.
• Ensure that the mains voltage matches the information on the type plate.
• Before first use, all packaging materials and protective films must be removed completely.
• After transport, leave the device upright for at least 12 hours before it is switched on to avoid damage to the refrigerant circuit.
• Ensure that the vents are not blocked to ensure optimum air circulation and cooling.
• The device must not be placed near heat sources or direct sunlight.
• Bottles of high alcohol content must be tightly closed and stored upright in the appliance.
• Electrical devices or heating sources shall not be used in the device.
• Never clean with water jet or high pressure cleaner to avoid electric shock and short circuit risk.
• Damaged cables or plugs may not be used. Replacements may only be made by qualified personnel.
• Before any cleaning, maintenance or repair, turn off the device and disconnect it from the power grid.
• Clean the door seal only with water and make sure it remains intact to avoid loss of energy.
• The refrigerant is combustible; if the cooling circuit is damaged, air the room well and avoid open flames.
• Children must not use the device unattended or play nearby.
• The device is intended exclusively for the storage of food; any other use can cause damage and affect the guarantee.
• Regular cleaning of the capacitor by qualified personnel is recommended to extend the life of the device.
• Be careful when handling the display case (breakable glass). No heavy objects against lean or beat.
• In the event of visible damage or malfunctions, immediately adjust the operation and contact qualified personnel.