Saro Coffee machine S48T

Product details

The Saro coffee machine S48T is suitable for the preparation of larger quantities of coffee in gastronomy, hotel, breakfast area, office, canteen or catering. With four glass cans it supports a continuous coffee supply in the buffet and service area.

The housing is made of black, enamelled steel, the basket filter holder is made of stainless steel. The scope of delivery includes four glass cans with 1.8 liters each, designed for approx. 4 x 12 cups.

The coffee machine has two hot and hot plates at the bottom as well as two hot plates at the top. The brewing time is approx. 5 minutes, the brewing temperature is approx. 93 to 96 °C. A dry running protection supports safe operation in daily use.

The device is equipped with two power cables with one Schuko plug each and has to be secured separately via different circuits. Thus, the S48T is designed for use with higher coffee volumes.

Product advantages

• Incl. 4 x 1,8L glass cans, for approx. 4x 12 cups
• Breeding time approx. 5 min.
• 40°C - 50°C - 50°C - 50°C - 50°C
• Dry running protection
• 2 bottom broth/warm holding plates, 2 upper warm holding plates
• Coffee machines in one unit, with 2 power cables with 1 Schuko plug each, separately secure over different circuits

Technical data

• Material: (case) steel inflammated, black; (basket filter holder) stainless steel
• Incl. 4 x 1,8L glass cans, for approx. 4x 12 cups
• Breeding time approx. 5 min.
• 40°C - 50°C - 50°C - 50°C - 50°C
• Dry running protection
• 2 bottom broth/warm holding plates, 2 upper warm holding plates
• Coffee machines in one unit, with 2 power cables with 1 Schuko plug each, separately secure over different circuits
• Connection: 230 V - 50/60 Hz – 2 x 2,060 kW
• Dimensions: W 400 x D 413 x H 425 mm
• Weight (net/gross): 12.1 / 15.1 kg
• NO on-site service

Service

No on-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

Manufacturer: Saro Gastro-Products GmbH - Sandbahn 6 - 46446 Emmerich am Rhein - GERMANY / GERMANY - info@saro.de - www.saro.de

EU responsible person: Not required. Manufacturer is located in the EU.

• Place the device exclusively on a stable, horizontal and heat-resistant surface.
• Ensure that the mains voltage matches the information on the type plate.
• Keep children and unauthorized persons away from the device during operation.
• Do not operate or move with wet hands.
• During operation, there is a risk of scalding by hot steam and hot liquids – be careful when handling lids, taps and containers.
• During operation always make sure that the water reaches the Min mark to avoid dry run.
• Do not exceed the max mark when filling the container to avoid overflow.
• In the event of visible damage or malfunctions, immediately stop operation.
• The device shall not be placed on a hot surface or operated near open flames.
• Before each cleaning, turn off the device, pull the plug and let it cool completely.
• Clean with a soft, damp cloth and mild detergent; do not use abrasive detergents.
• Never dip in water or clean with water jet.
• The device is to be decalcified regularly, depending on the water hardness and use, in order to ensure optimum function.
• Have repairs carried out only by qualified personnel with original spare parts.