Saro Coffee maker THERMO 48 ECO

Product details

The Saro coffee maker THERMO ECO is suitable for reliable coffee making in gastronomy, hotel, breakfast area, office, canteen or catering. By using stainless steel insulation cans, the freshly brewed coffee can be provided directly for the service and kept warm.

Housing and basket filter holders are made of stainless steel and are designed for professional use in commercial work areas. The supplied stainless steel insulation pump cans are manufactured inside and outside of stainless steel and support a practical output in the buffet or service area.

The coffee machines work with a brewing temperature of approx. 93 to 96 °C and have a dry run protection. Depending on the model, the coffee is brewed in approx. 9 to 10 minutes.

The product line includes a version with a stainless steel insulation pump, as well as a model with two coffee machines in one unit and two stainless steel insulation pump cans. This allows the suitable variant to be selected according to the required coffee volume and area of use.

Product advantages

• Incl. 2 stainless steel insulators a 2.5 liters (inside and outside stainless steel), approx. 2x 16 cups
• Breaking time approx. 10 min.
• Brow temperature: ca. 93 - 96°C
• Dry running protection
• 2 coffee machines in one unit, with a power cable with Schuko plug

Technical data

• Material: (housing and basket filter holder) stainless steel
• Incl. 2 stainless steel insulators a 2.5 liters (inside and outside stainless steel), approx. 2x 16 cups
• Breaking time approx. 10 min.
• Brow temperature: ca. 93 - 96°C
• Dry running protection
• 2 coffee machines in one unit, with a power cable with Schuko plug
• Connection: 230 V - 50 Hz - 3.1 kW
• Dimensions: W 405 x D 410 x H 560 mm
• Weight (net/gross): 13,5 / 15 kg
• NO on-site service

Service

No on-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

Manufacturer: Saro Gastro-Products GmbH - Sandbahn 6 - 46446 Emmerich am Rhein - GERMANY / GERMANY - info@saro.de - www.saro.de

EU responsible person: Not required. Manufacturer is located in the EU.

• Place the device exclusively on a stable, horizontal and heat-resistant surface.
• Ensure that the mains voltage matches the information on the type plate.
• Keep children and unauthorized persons away from the device during operation.
• Do not operate or move with wet hands.
• During operation, there is a risk of scalding by hot steam and hot liquids – be careful when handling lids, taps and containers.
• During operation always make sure that the water reaches the Min mark to avoid dry run.
• Do not exceed the max mark when filling the container to avoid overflow.
• In the event of visible damage or malfunctions, immediately stop operation.
• The device shall not be placed on a hot surface or operated near open flames.
• Before each cleaning, turn off the device, pull the plug and let it cool completely.
• Clean with a soft, damp cloth and mild detergent; do not use abrasive detergents.
• Never dip in water or clean with water jet.
• The device is to be decalcified regularly, depending on the water hardness and use, in order to ensure optimum function.
• Have repairs carried out only by qualified personnel with original spare parts.