Saro beverage cooler with billboard - narrow, DK 134 PRO

Product details

The Saro beverage refrigerators of the DK series are intended for use in catering, kiosk, sales area, hotel, office, self-service zone and beverage area. They are suitable for refrigerated storage and presentation of drinks on a limited footprint.

The units are designed in black and, depending on the model, have a housing made of PCM-coated or powder-coated material. Double-glazed, lockable glass doors allow a good view of the interior and support safe use.

Height-adjustable black rusts offer flexible mounting. Depending on the design, price strips, LED lighting, neutral advertising board or round design are available. The lighting can be switched separately and supports a clear product presentation.

The beverage refrigerators work with static cooling and air ventilator as well as automatic defrosting. The series includes compact and narrow models for different shelves and presentation requirements.

Product advantages

• With neutral billboard and 1 glass door with handle
• Door double glazed, self-closing, lockable
• LED lighting: Canopy (2.4 watts), inside (0.4 watts) and 2x on the door (4.8 watts), separately switchable
• 6 height adjustable, black rusts with price strips
• Analog temperature control
• Static cooling with air ventilator

Technical data

• Material: (case and interior) PCM coated black, (door frame) plastic black
• With neutral billboard and 1 glass door with handle
• Door double glazed, self-closing, lockable
• LED lighting: Canopy (2.4 watts), inside (0.4 watts) and 2x on the door (4.8 watts), separately switchable
• 6 height adjustable, black rusts with price strips
• Analog temperature control
• Static cooling with air ventilator
• Separate condenser fan (in the ground) for heat dissipation- Automatic defrosting
• Temperature range: +2 / +8 °C
• Connection: 230 V - 50 Hz - 0.115 kW
• Rusts: 6x W 308 x D 273 mm
• Capacity (gross/net): 150 / 130 litres
• Internal dimensions: W 325 x D 343 x H 1405 mm
• External dimensions: W 403 x D 439 x H 1900 mm
• 4 height adjustable feet
• Weight (net/gross): 68 / 77 kg
• Refrigerant: R600a
• Energy efficiency class: C (Spectrum A to G)
• NO on-site service

Service

No on-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

Manufacturer: Saro Gastro-Products GmbH - Sandbahn 6 - 46446 Emmerich am Rhein - GERMANY / GERMANY - info@saro.de - www.saro.de

EU responsible person: Not required. Manufacturer is located in the EU.

• Place the device exclusively on a stable, horizontal and non-slip surface.
• Ensure that the mains voltage matches the information on the type plate.
• After transporting or tilting the device over 45 degrees, leave the device upright for at least 24 hours before it is switched on to avoid damage to the cooling circuit.
• Ventilation slots and openings shall not be blocked to ensure optimum air circulation and cooling.
• The device must not be operated near heat sources or direct sunlight.
• Children and unauthorised persons must not use the device or be close to it unattended.
• Do not store flammable, explosive or chemical substances in the device.
• Never clean with water jet or dip into liquids to avoid short-circuit and electric shock.
• Do not put hot food or open liquids in the device to avoid condensation or icing problems.
• Damaged cables or connectors may not be used; replacement only by qualified personnel.
• Before any cleaning, maintenance or prolonged non-use, turn off the device and disconnect it from the power grid.
• The device is intended exclusively for the cooling and storage of beverages or food; other applications may cause damage and affect the warranty.
• The refrigerant is combustible; if the cooling circuit is damaged, air the room well and avoid open flames.
• After a power failure or disconnecting the power connector wait at least 5 minutes before the device is switched on again to avoid damage to the compressor.
• Repairs and maintenance work may only be carried out by qualified personnel.
• When transporting the device, make sure that the adjusting feet do not damage the power cable.
• In the event of visible damage or malfunctions, immediately adjust the operation and contact qualified personnel.
• Be careful when handling the glass door. Do not lean or hit any heavy objects against the door. Do not use the door in case of visible cracks or damage and have it replaced immediately by qualified personnel.
• For cleaning use only mild cleaning agents and clean the capacitor at least monthly to avoid dust deposits.