Saro Slush Ice Machine 2x 12 L., Slush 2 PRO

Product details

The Saro Slush Ice Cream Machines of the SLUSH 2 series are suitable for the production and issue of chilled slush drinks in gastronomy, snack, leisure area, kiosk or at events. Two separate containers each with 12 litres of capacity enable the simultaneous preparation and presentation of different types of beverages.

The units have a black front panel made of stainless steel 201 and black plastic lid. The operation is conveniently performed via a touch control panel. For the preparation of 6 litres a production time of about one hour is specified, for 12 litres about two hours.

The PRO version enables direct slush production from soft drinks and is also suitable for alcoholic beverages with an alcohol content of up to 20 percent and for beverages with pulp. Recipes with a lower sugar content can also be processed. Variable LED colors support an appealing presentation of the drinks.

Product advantages

• Lid: plastic, black
• Suitable for ambient temperatures between 20 °C - 35 °C
• Container size: 12 litres per container (12 kg)
• Direct Slush production from soft drinks
• Processing alcoholic beverages with up to 20% alcohol content suitable
• Suitable for drinks with pulp

Technical data

• Material: (case) plastic side wall and rear ventilation grille, front panel made of black stainless steel 201, (container) Tritan
• Lid: plastic, black
• Suitable for ambient temperatures between 20 °C - 35 °C
• Temperature range: -2/-12 °C
• Container size: 12 litres per container (12 kg)
• Direct Slush production from soft drinks
• Processing alcoholic beverages with up to 20% alcohol content suitable
• Suitable for drinks with pulp
• Operation with a lower sugar content possible
• Variable LED colors for a more responsive presentation
• Exhaust air rear, for space-saving installation
• Touch operation
• Production time: 1 hour for 6 litres, 2 hours for 12 litres
• Connection: 230 V – 50 Hz – 0.765 kW
• External dimensions: W 415 x D 475 x H 810 mm
• Weight (net/gross): 57 / 71 kg
• Refrigerants: R290
• NO on-site service

Service

No on-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

• Place the device exclusively on a stable, horizontal and non-slip surface.
• Ensure that the mains voltage matches the information on the type plate.
• Before first use, all packaging materials and protective films must be removed completely.
• After transport or movement, let the device rest for at least 24 hours before it is switched on to avoid damage to the refrigerant circuit.
• The refrigerant is combustible; if the cooling circuit is damaged, air the room well and avoid open flames.
• The device must not be placed near heat sources or direct sunlight.
• The vents must not be blocked to ensure optimum air circulation.
• Never clean with water jet or high pressure cleaner to avoid electric shock and short circuit risk.
• Do cleaning only with a soft cloth and mild detergent; do not use abrasive or corrosive agents.
• Never operate without a lid; moving parts can cause injury.
• Children and unauthorised persons may not use the device unattended.
• After a power failure wait at least 5 minutes before the device is switched on again to protect the compressor.
• Use only mixtures with a minimum sugar content of 13° Brix to avoid damage to the conveyor screws and the mechanics.
• In the event of visible damage, unusual noise or malfunctions, immediately adjust the operation and contact qualified personnel.