Saro Hood for Michelangelo ML935 & ML635L

Product details

The Saro hoods are intended as a suitable addition to selected pizza ovens of the Michelangelo series. They are suitable for use in professional baking and kitchen areas.

The hoods are made of stainless steel and are available in two sizes for the different furnace designs. This allows the models ML435 and ML635 as well as the wider or deeper versions ML935 and ML635L to be fitted appropriately.

The respective hood is tailored to the corresponding pizza oven models in its dimensions and requires a 230 volt connection.

Product advantages

• Hood for pizza ovens Michelangelo Model ML935 & ML635L (507-1015 & 507-1010)

Technical data

• Material: stainless steel
• Hood for pizza ovens Michelangelo Model ML935 & ML635L (507-1015 & 507-1010)
• Connection: 230 V - 50 - 60 Hz - 0.007 kW
• Dimensions: W 1200 x D 1546 x H 410 mm
• Weight (net/gross): 77 / 85 kg
• NO on-site service

Service

No on-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

Manufacturer: Cuppone SRL - Via Sile 36 - 31057 Silea (Treviso) - ITALY / ITALY - Tel.: +39 0 42 23 61 14 3 - pampanin@cuppone.com - www.cuppone.com

EU responsible person: Not required. Manufacturer is located in the EU.

• The device is intended exclusively for the evacuation of steams from ovens and when opening the oven door. Any other use is considered as a misuse of purpose and may be dangerous.
• Before first use, clean the hood and ensure that all components are properly assembled.
• Only operate the device in well ventilated rooms. Make sure that the air vents of the operating panel remain free and are not blocked.
• The hood must not be operated without a filter. Clean the filters regularly to ensure the functionality and safety of the device.
• Some components can reach high temperatures. Do not touch them and do not bring flammable or heat-sensitive materials near them.
• No objects may be placed on the hood during operation.
• In the event of visible damage, unusual operating noise or malfunctions, immediately stop operation and contact the dealer or qualified personnel.
• Repairs and maintenance work may only be performed by authorized personnel. Use only original spare parts.
• Before any cleaning or maintenance, separate the device from the power grid and ensure that the hood is fully cooled.
• Do not use scrubbing or aggressive detergents or high pressure cleaners for cleaning.
• Children and unauthorised persons must not be near or use the hood.
• The device must not be used in potentially explosive areas or near highly flammable materials.
• After prolonged non-use, thoroughly clean the device and check for functionality before restarting.
• Regular inspection by qualified personnel is recommended to ensure the efficiency and safety of the hood.
• Safely dispose of packaging materials to avoid suffocation risks.