Saro Cooling table with 3 doors, KYLJA 3100 TN PRO

Product details

The Saro cooling tables of the KYLJA series are suitable for professional use in catering, large kitchen, hotel, canteen and food preparation. They combine cooled storage space with a stable stainless steel work surface and thus support efficient workflows during storage, preparation and processing of refrigerated food.

Housing, interior and work surface are made of stainless steel and are designed for everyday kitchen use. Depending on the model, versions with doors, drawer sets or combined door and drawer elements are available. With the door variants, height-adjustable gratings and matching support rail sets ensure a flexible layout of the interior.

Copeland's digital temperature control system enables reliable monitoring of the cooling temperature. Recooling, automatic defrosting and 60 mm insulation support uniform cooling in the temperature range from -2 to +8 °C. Height-adjustable feet facilitate adjustment to the respective location.

The series is available in different widths as well as with different door and drawer combinations. Thus, the cooling table can be selected according to the space available, the workflow and the desired storage space.

Product advantages

• 3 doors, self-closing, with practical magnetic seal
• 3 height-adjustable gratings and support rail sets
• 3 floor gratings (390 x 505 mm) for optimal air circulation
• Interior with rounded corners for easy cleaning
• Suitable for setting 1/1 GN container
• Pull-out compressor for easy cleaning

Technical data

• Material: (housing, work surface, interior) stainless steel AISI 304
• 3 doors, self-closing, with practical magnetic seal
• 3 height-adjustable gratings and support rail sets
• 3 floor gratings (390 x 505 mm) for optimal air circulation
• Interior with rounded corners for easy cleaning
• Suitable for setting 1/1 GN container
• Pull-out compressor for easy cleaning
• Cleaning-free condenser
• Digital temperature control (Copeland)
• Insulation: 60 mm
• Air cooling with highly efficient fan
• Automatic fan shut-off system at door opening
• Automatic defrosting and automatic evaporation of condensation water
• Suitable for climate class 4, 5
• Temperature range: -2 / +8 °C
• Connection: 220 V / 1 Ph. / 50 Hz / 0.250 kW
• Rusts for floor: 3x W 390 x D 505 mm and rusts: 3x W 335 x D 530 mm
• Content (gross/net): 465 / 291 litres
• Internal dimensions: W 1234 x D 530 x H 564 mm
• External dimensions: B 1795 x D 700 x H 890-950 mm
• 6 height-adjustable feet, optional additional rollers available
• Weight (net/gross): 134 / 151 kg
• Refrigerant: R600a
• Energy efficiency class: A (Spectrum A+++ to G) for climate class 5
• > High-performance device!
• On-site service

Service

On-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

Manufacturer: Saro Gastro-Products GmbH - Sandbahn 6 - 46446 Emmerich am Rhein - GERMANY / GERMANY - info@saro.de - www.saro.de

EU responsible person: Not required. Manufacturer is located in the EU.

• Place the device exclusively on a stable, horizontal surface.
• Ensure that the mains voltage matches the information on the type plate.
• The device shall not be operated near combustible materials or heat sources.
• Children and unauthorised persons must not use the device or use it improperly.
• Ventilation slots must not be blocked or concealed to avoid overheating.
• In the event of visible damage or malfunction, immediately adjust the operation and have the device checked.
• Do cleaning only if the device is switched off and separated from the network.
• Only use original spare parts and accessories that are approved for this device.
• Do not put hot food or open containers with liquids in the device to avoid condensation and icing problems.
• Cold-middle is flammable.
• If the cooling circuit is damaged, turn off the device immediately, disconnect from the power supply and ventilate the room. Avoid open fire or sparking.
• Do not use mechanical devices or tools to speed up the defrosting process. This could damage the cooling circuit.
• Repairs and maintenance work may only be carried out by qualified personnel.