Saro Countertop cooling TAMAR 186

Product details

The Saro Countertop Coolings of the TAMAR series are designed for the chilled presentation of food, snacks, desserts and drinks in gastronomy, café, bakery, buffet area, canteen and sales environment. They are suitable for counter areas with increased presentation requirements.

The case consists of stainless steel, sides and window of sight made of tempered glass. The four-sided double glazing supports a transparent product presentation.

Three height-adjustable chrome-plated gratings allow flexible installation of the interior. The two-part sliding door on the back facilitates refilling and operation from the service side.

LED interior lighting, digital temperature control, recirculation air cooling and automatic defrosting are designed for professional use. The series is available in several sizes and operates in the temperature range from +2 to +8 °C.

Product advantages

• 4-seitig doppelverglast
• 2-part sliding door at the back
• 3 height adjustable gratings, chrome plated, W 813 x D 374 mm
• LED interior light on top
• Digital temperature control
• Circular air cooling

Technical data

• Material: (case) stainless steel, (sides, viewing window) tempered glass, (door frame) plastic
• 4-seitig doppelverglast
• 2-part sliding door at the back
• 3 height adjustable gratings, chrome plated, W 813 x D 374 mm
• LED interior light on top
• Digital temperature control
• Circular air cooling
• Automatic defrosting
• Suitable for climate class: 4
• Temperature range: +2 / +8 °C
• Connection: 230 V - 50 Hz - 0.330 kW
• Contents (gross): 186 L
• Internal dimensions: W 859.5 x D 490 x H 450.5 mm
• External dimensions: W 874 x D 574 x H 887 mm
• Weight (net/gross): 80 / 83 kg
• Refrigerants: R290
• Energy efficiency class: B (Spectrum A to G)
• NO on-site service

Service

No on-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

Manufacturer: Saro Gastro-Products GmbH - Sandbahn 6 - 46446 Emmerich am Rhein - GERMANY / GERMANY - info@saro.de - www.saro.de

EU responsible person: Not required. Manufacturer is located in the EU.

• Place the device exclusively on a stable, horizontal and non-slip surface.
• Ensure that the mains voltage matches the information on the type plate.
• Before first use, all packaging materials and protective films must be removed completely.
• After transport, leave the device upright for at least 12 hours before it is switched on to avoid damage to the refrigerant circuit.
• Ensure that the vents are not blocked to ensure optimum air circulation and cooling.
• The device must not be placed near heat sources or direct sunlight.
• Bottles of high alcohol content must be tightly closed and stored upright in the appliance.
• Electrical devices or heating sources shall not be used in the device.
• Never clean with water jet or high pressure cleaner to avoid electric shock and short circuit risk.
• Damaged cables or plugs may not be used. Replacements may only be made by qualified personnel.
• Before any cleaning, maintenance or repair, turn off the device and disconnect it from the power grid.
• Clean the door seal only with water and make sure it remains intact to avoid loss of energy.
• The refrigerant is combustible; if the cooling circuit is damaged, air the room well and avoid open flames.
• Children must not use the device unattended or play nearby.
• The device is intended exclusively for the storage of food; any other use can cause damage and affect the guarantee.
• Regular cleaning of the capacitor by qualified personnel is recommended to extend the life of the device.
• Be careful when handling the display case (breakable glass). No heavy objects against lean or beat.
• In the event of visible damage or malfunctions, immediately adjust the operation and contact qualified personnel.