NordCap Shelf system RS 18-24-80 for refrigerated cell NC-80 180-240-220, 3 shelf elements with 4 shelves each

Product details

The NordCap shelf system RS 18-24-80 is adapted to the NC-80 180-240-220 cooling cell and consists of 3 shelf elements with 4 shelves each – with anodized aluminium and light grey PE-HD lamellas.

The RS 18-24-80 shelf system is designed to store food in refrigerators and fits the NordCap NC-80 180-240-220 cooling cell. The system consists of 3 shelves with 4 shelves each. The shelves are suitable for direct food contact, so food can be stored directly on the shelves. The interior of the cooling cell can thus be clearly divided into several levels and the existing area can be used well.

The shelf system is built up as a modular system according to the modular principle in free-standing installation. The individual parts are connected by simple snapping, fixtures, screws and similar fasteners are not visible on the finished shelf. For installation and installation, NordCap provides an operating instruction with a description of the shelf system, a dimensional drawing as well as a product data sheet and a tender template.

The shelf supports are made of anodized aluminium with an anodized layer of 20 μm. The shelves are covered with polyethylene (PE-HD) lamellas in light grey. These lamellas are dishwasher-compatible, so that they can be cleaned in the dishwasher if necessary. Overall, the system is constructed of clean-friendly elements, which facilitates hygienic care in the everyday cooling cell.

The shelf system is designed for a high load: The field and compartment load is between 180 and 250 kg depending on the axle length, each with a uniform distribution of the goods. Heavy containers should therefore be distributed evenly over the shelf area. The shelf system is manufactured in Denmark. The cooling cell itself is not part of this article and is available separately.

• 3 x shelf element with 4 shelves each

• Manufacturer item number: 528508018240
• Suitable for: NC-80 180-240-220
• Version: 3 shelves with 4 shelves each
• Suitable for: for storage of food in refrigerated cells, suitable for direct food contact
• Construction option: modular system, freestanding installation (building kit principle)
• Assembly: by simply snapping the parts, fastenings and screws not visible
• Shelf supports: anodised aluminium (20 μm)
• Lamella: polyethylene (PE-HD), light grey, dishwasher safe
• Field and compartment load: 180 to 250 kg depending on the axle length with uniform distribution
• Country of origin: Denmark

• Tuned to the NordCap cooling cell NC-80 180-240-220
• Suitable for direct food contact
• Module system according to the modular principle, freestanding
• Mounting by simple snapping, fixings not visible
• Anodised aluminium shelf supports
• Dishwasher-compatible lamellas made of PE-HD
• Field and compartment load from 180 to 250 kg depending on the axle length

Notes on establishment and operation

The specified field and compartment load of 180 to 250 kg (depending on the axle length) applies with uniform distribution of the goods. The cooling cell is not included.

Operating instructions

Download user manual (PDF)

Energy labelling

This product without electronic components is not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.