NordCap MORETTI Electric pizza oven iDeck iD-D 72.42 DIGITAL, 2 baking chambers, 4 x pizza Ø 35 cm, up to 380 °C, 400 V

Product details

The NordCap MORETTI Elektro-pizza oven iDeck iD-D 72.42 DIGITAL bakes in two overlaying baking chambers on sandblasted Schamottstein floor – either 4 x pizza Ø 35 cm or 2 x pizza sheet 600 x 400 mm.

The MORETTI iDeck iD-D 72.42 DIGITAL is an electric oven from the iDeck series with two baking chambers. It is suitable for direct baking on the Schamottstein floor as well as for baking on EN sheets 600 x 400 mm. Each baking chamber can accommodate either 2 x pizza Ø 35 cm or 1 x pizza sheet 600 x 400 mm, i.e. a total of 4 pizzas or 2 sheets. The inner dimensions are given with 614 x 660 x 140 mm (W x D x H), the outer dimensions are 988 x 798 x 660 mm.

The oven is operated via an electronic control system with digital display, start/stop function, light function and backtimer. The upper and lower heat can be controlled electronically separately, a temperature sensor per chamber monitors the baking temperature. The temperature range is 50 to 380 °C, for cleaning the temperature can be increased to up to 450 °C. A shock-proof halogen lamp illuminates the baking chamber.

The stainless steel door flap with safety glass can be folded down, it has a stainless steel handle and a spring-supported door opening system. Reinforced heating elements lie below the sandblasted Schamottstein floor, inside the baking chamber is covered with steel sheet. Outside the oven is covered with stainless steel, an energy-saving insulation made of mineral wool keeps the heat in the baking chamber.

The furnace is connected to 400 V three-phase current (3N, 50 Hz), the connection value is 10.00 kW. The net weight is 130 kg, the furnace is produced in Italy. It is supplied without cover and underframe. Optionally available are a cover cover for iDeck 72.42 and underframes with wheels for baking trays 600 x 400 mm with 3 pairs (max. 5 pairs) or 5 pairs (max. 9 pairs) baking tray racks; the underframes are delivered disassembled and installed on site.

• 1 x electric oven iDeck iD-D 72.42 DIGITAL (2 baking chambers, without cover and underframe)

• Manufacturer item number: 493072042222
• Baking chambers: 2
• Installation type: Stand-up equipment
• Suitable: direct baking or baking on EN sheet 600 x 400 mm
• Recording (optional): 2 + 2 x pizza Ø 35 cm or 1 + 1 x pizza sheet 600 x 400 mm
• Temperature range: 50 to 380 °C, for cleaning up to 450 °C
• Control: electronic, digital display, start/stop, light, backtimer, temperature sensor per chamber, top and bottom heat separately adjustable
• External dimensions (W x D x H): 988 x 798 x 660 mm
• Internal dimensions (W x D x H): 614 x 660 x 140 mm
• Type of energy: electric
• Connection: 10,00 kW, 400 V, 3N, 50 Hz
• Heating: reinforced heating elements below the Schamottstein floor
• Interior lighting: halogen lamp, shock-proof built in
• Insulation: energy-saving insulation (mineral wool)
• Facing outside: stainless steel
• Internal cladding: steel sheet, baking chamber with sandblasted Schamottstein floor
• Weight: 130 kg net
• Country of origin: Italy

• Baking directly on sandblasted Schamottstein floor or on EN sheet 600 x 400 mm
• Electronically adjustable over and underheat separately
• 50 to 380 °C, cleaning up to 450 °C
• Digital display with backtimer and light function
• stainless steel oven flap with safety glass and spring-assisted door opening system
• Shock-proof halogen interior lighting
• Energy-saving insulation made of mineral wool

Notes on establishment and operation

Supplied without cover and underframe; both are available as optional accessories. Underframes are delivered disassembled, the installation on site is required. Connection to 400 V three-phase current by an electric specialist.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial heat equipment is currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: Moretti Forni Spa, Via Meucci 4, 61037 Mondolfo (PU), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.