NordCap Waste cooler KK 2240 for 2 x 240-l tons, impact opening with stainless steel funnel, plug-in 230 V

Product details

The NordCap KK 2240 waste cooler cools two 240-litre tons at 2 to 8 °C, has a drop-in opening with stainless steel funnel per cooling compartment and is delivered fully assembled.

The KK 2240 is designed for use in large kitchens, factory canteens, hospitals, care facilities, production kitchens and communal catering. It serves the cooling and storage of waste containers and helps to avoid odours and germ development. The unit can accommodate two 240-litre tons, the tons themselves are not included. With external dimensions of 1740 x 985 x 1280 mm (W x D x H) and an interior of 1300 x 770 x 1160 mm, it offers 240 litres of gross capacity. The waste cooler is delivered fully assembled.

Each cooling compartment has its own entry opening with integrated stainless steel funnel for filling the waste container. There are two CNS lids that can be folded upwards, each with an ergonomic grip strip and a magnetic seal that can be replaced without tools. Two full doors with an opening position at 100° and an ergonomic grip strip each serve to change the tons, the door stop is arranged on the left and right and cannot be changed. The electronic control in the cooling unit with digital display, main switch, operating display and temperature control keeps the temperature range from 2 to 8 °C, expressed at 43 °C ambient temperature and 65 % relative humidity.

The housing and interior are made of stainless steel CNS 1.4301, the ramp is also made of CNS 1.4301. The PU insulation with a density of 35 to 40 kg/m3 is up to 50 mm thick and keeps the cold in the unit. The air flow is via integrated inlet and outlet air openings. Defrosting and dewwater evaporation run automatically. The device is suitable for the protected outdoor area, but must be protected from direct weather and placed under a roof.

Cooling is done with circulating air and natural refrigerant R-290 (Propane, 90 g) at a cooling capacity of 714 W at -6.7 °C evaporation temperature. The machine compartment sits right outside the interior, the monoblock cooling unit is removable. A winter circuit with temperature controlled crankcase heating is integrated. The waste cooler is classified as climate class 5 (+40 °C ambient temperature, 40% relative humidity) and is supplied ready for plugging for 230 V with a connection value of 0.25 kW.

• 1 x waste cooler KK 2240 (ready to be mounted, without garbage bins)
• 1 x mono-block cooling unit
• 1 x integrated winter circuit

• Manufacturer's item number: 53560002
• Suitable: for cooling and storage of waste containers as well as for avoiding odours and germ development
• Recording (optional): 2 x 240 l waste containers
• Injection opening: with integrated stainless steel funnel (per cooling compartment)
• Lid: 2 x CNS cover, folds up, magnetic seal can be replaced without tools
• Door: 2 x full door, opening at 100°, door stop on the left, not interchangeable
• Installation type: Stand-up equipment
• External dimensions (W x D x H): 1740 x 985 x 1280 mm
• Internal dimensions (W x D x H): 1300 x 770 x 1160 mm
• Gross content: 240 l, Net content: 240 l
• Temperature range: 2 to 8 °C (at 43 °C ambient temperature and 65 % relative humidity)
• Climate class: 5 (+40 °C ambient temperature, 40% relative humidity)
• Control: electronic (in the cooling unit), digital display
• Type of cooling: recirculated air cooling
• Machine compartment: right (outside the interior), mono-block cooling unit removable
• Refrigerant: R-290 (propane), filling quantity 90 g
• Cooling capacity: 714 W at -6,7 °C Evaporation temperature
• Connection: plug ready, 0,25 kW, 230 V, 1-phase, 50 Hz
• Outside facing: CNS 1.4301, ramp CNS 1.4301
• Internal facing: CNS 1.4301
• Insulation: PU insulation, density 35 to 40 kg/m3, up to 50 mm
• Weight: 187 kg net
• Country of origin: Turkey

• Inlet opening with integrated stainless steel funnel per cooling compartment
• Two top-folding CNS-cover with ergonomic grip strip
• Tool-free interchangeable magnetic seals on lids and doors
• Winter switching by temperature controlled crankcase heating
• Removable monoblock cooling unit, machine compartment outside the interior
• Suitable for protected outdoor use under roofing
• Delivery ready assembled and plug-in

Notes on establishment and operation

Delivery ready assembled, without garbage cans. The device is suitable for the protected outdoor area, is to be protected from direct weather and placed only under roofing.

Energy labelling

No EU energy label is stored for this device on the manufacturer's side.

Product safety (GPSR)

Manufacturer: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.