Saro Commercial fridge model GN 700 TN PRO

Product details

The Saro commercial refrigerators of the GN-TN-PRO series are designed for professional use in catering, large kitchen, hotel, canteen and production kitchen. They are suitable for refrigerated storage of food and are intended for the 2/1-GN area.

The housing is made of stainless steel AISI 430, the interior is made of stainless steel AISI 304. The self-locking and lockable doors are equipped with magnetic seal. Height-adjustable gratings with distributed load and floor gratings support structured storage and good air circulation in the interior.

The digital temperature control, condensation air cooling with highly efficient fan, automatic defrosting and automatic evaporation of condensation water are tailored to commercial operation. The automatic fan shut-off system at door opening supports operational use.

The series is suitable for climate classes 4 and 5 and operates in the temperature range from -2 to +8 °C. Depending on the space required and the amount of storage, single and double-door versions are available.

Product advantages

• 1 door, self-closing, lockable, with practical magnetic seal
• Interchangeable door stop
• 3 height-adjustable rusts, load capacity per rust: up to approx. 25 kg distributed
• Rust adjustment up to 80 mm minimum distance possible
• Fixed rust insertion possibilities through side wall dancing
• 1 floor grating (B 510 x D 605 mm) for optimal air circulation

Technical data

• Material: stainless steel AISI 430, (interior) stainless steel AISI 304
• 1 door, self-closing, lockable, with practical magnetic seal
• Interchangeable door stop
• 3 height-adjustable rusts, load capacity per rust: up to approx. 25 kg distributed
• Rust adjustment up to 80 mm minimum distance possible
• Fixed rust insertion possibilities through side wall dancing
• 1 floor grating (B 510 x D 605 mm) for optimal air circulation
• Suitable for 2/1 GN container
• LED interior lighting, separately switchable
• Digital temperature control (Copeland)
• Insulation: 100 mm
• air cooling with highly efficient fan and optimal air flow
• Automatic fan shut-off system at door opening
• Automatic defrosting and automatic evaporation of condensation water
• Suitable for climate class 4, 5
• Temperature range: -2 / +8 °C
• Connection: 230 V / 50 Hz / 0.070 kW
• Rusts: 3x W 530 x D 650 mm + for floor: W 510 x D 605 mm
• Capacity (gross/net): 560 / 408 litres
• Internal dimensions: W 533 x D 700 x H 1501 mm
• External dimensions: W 740 x D 875 x H 2090 mm
• 4 height adjustable feet
• Weight (net/gross): 134 / 143 kg
• Refrigerant: R600a
• Energy efficiency class: A (Spectrum A+++ to G) for climate class 5
• > High-performance device!
• On-site service

Service

On-site service according to manufacturer

Documents & Downloads

• Technical data sheet (PDF)

Safety & manufacturer's instructions

Manufacturer: Manufacturer: Saro Gastro-Products GmbH - Sandbahn 6 - 46446 Emmerich am Rhein - GERMANY / GERMANY - info@saro.de - www.saro.de

EU responsible person: Not required. Manufacturer is located in the EU.

• Place the device exclusively on a stable, horizontal surface.
• Ensure that the mains voltage matches the information on the type plate.
• Children and unauthorised persons must not use the device or use it improperly.
• Never clean device with water jet to avoid short-circuit danger.
• After transporting the device, it must stand upright for at least 24 hours before it is switched on to prevent damage to the refrigerant circuit.
• The device must not be operated near heat sources, direct sunlight or in damp rooms.
• For adequate ventilation, keep at least 10 cm distance from the rear wall and 30 cm upwards.
• The ventilation area must always be free of dust and obstacles to ensure optimum cooling performance.
• The refrigerant is combustible – it is essential to avoid damage to the cooling circuit and in case of a leak, air the room well. Avoid open fire or sparking.
• In case of visible damage or malfunctions immediately stop operation and contact the dealer.
• Before any cleaning, maintenance or prolonged non-use, pull the power plug and let the device defrost completely.
• The cleaning of the condenser slots should be carried out regularly to remove dust deposits and maintain efficiency.
• Repairs and maintenance work may only be carried out by qualified personnel.