NordCap NC-80 210-210-220 with panel bottom, 7.7 m3, without aggregate, 80 mm PU

Product details

The NordCap NC-80 210-210-220 cooling cell offers 7.7 m3 cooling volume in the modular panel system with non-slip stainless steel floor and is supplied without a cooling unit.

The NC-80 210-210-220 is a walk-in cooling cell from the NordCap series NC-80 with panel bottom and is used for cooling and storing meat, vegetables and beverages. With external dimensions of 2100 x 2100 x 2200 mm (W x D x H) and internal dimensions of 1940 x 1940 x 2040 mm, 7.7 m3 cooling volumes are available. In the basic equipment the cell is delivered without a cooling unit, the matching unit is selected separately.

The modular panel system is designed in a segmental design according to the groove-spring principle, the assembly is made without screws and silicone. The full door has a light dimension of 700 x 1845 mm (W x H), can be opened up to 100° and is equipped with frame heating, cylinder lock, integrated internal emergency opening and plastic handle. The door stop is right and replaceable, the magnetic seal can be changed tool-free.

The panels are galvanized inside and outside and white, the PU insulation with a density of 42 kg/m3 is up to 80 mm thick. The floor is made of anti-slip stainless steel sheet with 1.0 mm thickness and galvanized base and is designed for a surface load of up to 1,000 kg/m2. The floor is not intended for trolley traffic.

For operation, a separate cooling unit is required, which should be mounted next to the door panel. As a suitable accessory, the Huckepack cooling unit NC-GN 7610 is optionally available for indoor volumes of 7.6 to 10.0 m3. Also available are the RS 21-21-80 (3 shelf elements with 4 shelves each) and RS 21-21-80-TB (4 shelf elements with 4 shelves each), a lamella curtain for NC-80 cooling cells (width from 1500 mm) and a ramp. Shelves and interior fittings are not included. The cell is manufactured in Turkey.

• 1 x refrigerated cell NC-80 210-210-220 with panel floor, disassembled, without refrigeration unit

• Manufacturer item number: 535080212122
• Suitability: for cooling and storage of meat, vegetables and beverages
• External dimensions (W x D x H): 2100 x 2100 x 2200 mm
• Internal dimensions (W x D x H): 1940 x 1940 x 2040 mm
• Cooling volume: 7,7 m3
• Construction: modular panel system, segment construction, groove-spring principle, mounting without screws or silicone
• Door: 1 x full door, light dimensions 700 x 1845 mm (W x H), opening at 100°
• Door equipment: frame heating, cylinder lock, internal emergency opening, plastic handle, magnetic seal tool-free replaceable
• Door stop: right, changeable
• Floor: stainless steel sheet, anti-slip, underside galvanized, 1.0 mm, up to 1,000 kg/m2
• Insulation: PU, density 42 kg/m3, up to 80 mm
• exterior facing: galvanized, white
• lining inside: galvanized, white
• Refrigeration unit: not included
• Country of origin: Turkey

• Modular panel system with groove-spring principle, mounting without screws or silicone
• Full door with frame heating, cylinder lock and integrated internal emergency opening
• Tool-free replaceable magnetic seal, door stop replaceable
• Non-slip stainless steel floor with up to 1,000 kg/m2 surface load
• PU insulation up to 80 mm
• Matching piggyback cooling unit NC-GN 7610 optionally available

Notes on establishment and operation

The cooling cell is delivered disassembled, shelves and interior fittings are not included. A separate cooling unit is required for operation, the installation of which should take place next to the door panel. The floor is not designed for rolling stock traffic. Cell and unit are not suitable for outdoor installation.

Operating instructions

Download user manual (PDF)

Energy labelling

No EU energy label is stored for this device on the manufacturer's side.

Product safety (GPSR)

Manufacturer: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.