NordCap NC-80 150-300-220 with panel bottom, 7.8 m3, without aggregate, 80 mm PU

Product details

The NordCap NC-80 150-300-220 cooling cell offers 7.8 m3 cooling volume in the modular panel system with 80 mm PU insulation and stainless steel floor and is supplied without a cooling unit.

The NC-80 150-300-220 is a walk-in cooling cell for the cooling and storage of meat, vegetables and beverages. With external dimensions of 1500 x 3000 x 2200 mm (W x D x H) and internal dimensions of 1340 x 2840 x 2040 mm, 7.8 m3 cooling volumes are available. The cell is supplied in the basic equipment without a cooling unit, so that a suitable cooling unit can be selected separately.

The modular panel system is designed in a segmental design according to the groove-spring principle, the installation is done without screws and silicone. The full door has a light dimension of 700 x 1845 mm (W x H), opens up to 100° and is equipped with frame heating, cylinder lock, integrated internal emergency opening and plastic handle. The door stop is arranged on the right and changeable, the magnetic seal can be replaced without tools.

The panels are galvanized inside and outside and white, the PU insulation with a density of 42 kg/m3 is up to 80 mm thick. The floor is made of anti-slip stainless steel sheet with 1.0 mm thickness and galvanized underside, the area load is up to 1,000 kg/m2. The floor is not designed for rolling stock traffic.

A separate refrigeration unit is required for operation, which should be mounted next to the door panel. Shelves and interior fittings are not included. Optionally available are a Huckepack cooling unit NC-GN 7610 for internal volumes from 7.6 to 10.0 m3, a suitable shelf system consisting of 3 shelves with 4 shelves each, a slat curtain for the door opening and a ramp. The cooling cell is delivered disassembled and installed on site. Cell and aggregate are not suitable for outdoor installation. The cell is produced in Turkey.

• 1 x refrigerated cell NC-80 150-300-220 with panel floor, disassembled, without refrigeration unit

• Manufacturer item number: 535080153022
• Suitability: for cooling and storage of meat, vegetables and beverages
• External dimensions (W x D x H): 1500 x 3000 x 2200 mm
• Internal dimensions (W x D x H): 1340 x 2840 x 2040 mm
• Cooling volume: 7,8 m3
• Construction: modular panel system, segment construction, groove-spring principle, mounting without screws or silicone
• Door: 1 x full door, light dimensions 700 x 1845 mm (W x H), opening at 100°
• Door equipment: frame heating, cylinder lock, internal emergency opening, plastic handle, magnetic seal tool-free replaceable
• Door stop: right, changeable
• Floor: stainless steel sheet, anti-slip, underside galvanized, 1.0 mm, up to 1,000 kg/m2
• Insulation: PU, density 42 kg/m3, up to 80 mm
• exterior facing: galvanized, white
• lining inside: galvanized, white
• Refrigeration unit: not included
• Country of origin: Turkey

• Modular panel system with groove-spring principle, mounting without screws or silicone
• Full door with frame heating, cylinder lock and integrated internal emergency opening
• Tool-free replaceable magnetic seal, door stop replaceable
• Non-slip stainless steel floor with up to 1,000 kg/m2 surface load
• PU insulation up to 80 mm
• Aggregate freely selectable, as basic equipment without a cooling unit

Notes on establishment and operation

The cooling cell is delivered disassembled, shelves and interior fittings are not included. A separate cooling unit is required for operation, the installation of which should take place next to the door panel. The floor is not designed for rolling stock traffic. Cell and unit are not suitable for outdoor installation.

Operating instructions

Download user manual (PDF)

Energy labelling

No EU energy label is stored for this device on the manufacturer's side.

Product safety (GPSR)

Manufacturer: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.