NordCap blast chiller / blast freezer C15.1 COMPACT-LINE, 12 x GN 1/1 or EN 600 x 400, 50 kg/cycle, 400 V

Product details

The NordCap C15.1 COMPACT-LINE cools and shock-freezes up to 50 kg of food per cycle and takes up to 12 containers GN 1/1-65 or sheets EN 600 x 400 in the transverse feed.

The C15.1 COMPACT-LINE is a multi-function device for quick cooling and shock frosting for GN 1/1 gas standard containers and bakery standard EN 600 x 400 mm in a cross feed. It processes 50 kg of product per cycle, for quick cooling from +90 to 3 °C as well as for shock frosting from +90 to -18 °C. Optionally, 12 x GN 1/1-65 or EN 600 x 400 can be used, with special accessories up to 18 x GN 1/1-40 or up to 37 x GN 1/1-20, alternatively up to 24 ice bowls with 5.0 liters. The standing unit measures 800 x 813 x 1935 mm outside (W x D x H), the interior 679 x 450 x 1175 mm.

Control is controlled by an electronic control in the front panel with digital display in capacitive technology, the control board is protected according to protection class IP67. You can choose from the operating modes Soft-Chilling, Hard-Chilling, Soft-Freezing and Hard-Freezing as well as 11 additional programs, the HACCP data can be read out via a smartphone app. A core temperature sensor with two measuring points belongs to the standard equipment, as well as a mounting frame for GN 1/1 or EN 600 x 400 with 15 pairs of support rails.

Housing and interior are made of stainless steel CNS 1.4301, the plastic door frame. The interior has rounded corners and an integrated floor drain with stopper. The self-closing CNS full door with ergonomic handle has a tool-free interchangeable magnetic seal, the door stop is left and can be changed on the factory side without extra charge. Manual thawing is only done at the end of production, during the working cycles no defrosting is necessary, the dew water shell can be pulled out. In the machine compartment below, the protective grille is removable for cleaning, cabling and components are easily accessible.

Three bionic radial fans in protection class IP54, special ducts to guide the air flow into the evaporator and the plus system for air volume, speed and uniformity ensure a uniform air flow, while the fans stop when the door is opened. A thermostatic expansion valve and the XL evaporator surface with cathodic submersible coating support the rapid heat withdrawal. The cooling capacity is 3500 W at -10 °C evaporation temperature with R-290 (propane, 300 g), the working temperature ranges from -35 to 3 °C. The device is connected to 400 V (3 ph + N, 50 Hz) with 2.50 kW and 6.2 A protection, the insulation of PUR hard foam is up to 60 mm thick.

• 1 x blast chiller / blast freezer C15.1 COMPACT-LINE
• 1 x frame frame, for GN 1/1 or EN 600 x 400
• 1 x core temperature sensor with two measuring points
• 15 x support rails (each 2 pcs)
• 4 x feet, height adjustable, H 118 to 175 mm

• Manufacturer item number: 4491001520
• Mounting (optional): 12 x GN 1/1-65 or EN 600 x 400 mm, insert crosswise; up to 18 x GN 1/1-40 or up to 37 x GN 1/1-20 with special accessories; up to 24 x ice bowl 5.0 l (330 x 165 x 120 mm)
• Power: 50 kg Product quantity per cycle (quick cooling +90 °C to 3 °C), 50 kg per cycle (shock frosts +90 °C to -18 °C)
• Temperature range Quick cooling: 90 to 3 °C (at 32 °C ambient temperature and 55 % relative humidity)
• Temperature range Shock frosts: 90 to -18 °C (at 32 °C ambient temperature and 55 % relative humidity)
• Working temperature: -35 to 3 °C
• Input temperature: up to +90 °C
• External dimensions (W x D x H): 800 x 813 x 1935 mm
• Internal dimensions (W x D x H): 679 x 450 x 1175 mm
• Depth with open door: 1567 mm
• Climate class: 4 (+30 °C ambient temperature, 55% relative humidity)
• Type of cooling: air recirculation, self-cooled
• Refrigerant: R-290 (propane), filling quantity 300 g
• Cooling capacity: 3500 W at -10 °C Evaporation temperature
• Control: electronic (in the front panel), digital display, capacitive technology, control board IP67, 11 additional programs
• Connection: 2,50 kW, 400 V, 3 ph + N, 50 Hz
• Hedging: 6,2 A
• Insulation: PUR hard foam, up to 60 mm
• exterior facing: CNS 1.4301, door frame made of plastic
• Internal facing: CNS 1.4301
• Installation type: Stand-up equipment
• Weight: 225 kg net
• Country of origin: Italy

• Quick cooling and shock frosts with 50 kg each per cycle
• Soft-Chilling, Hard-Chilling, Soft-Freezing, Hard-Freezing and 11 additional programs
• HACCP data readable via smartphone app
• Core temperature sensor with two measuring points as standard
• 3 bionic radial fans (IP54), plus system, fan stop after door opening
• XL evaporator surface with cathodic submersible coating
• Defrosting only at the end of production, not during cycles
• Door stop without extra charge changeable on the factory side

Notes on establishment and operation

Ice bowls and GN sheets are not included. For ventilation and ventilation, a minimum distance of 40 mm from the sides and 50 mm from the rear wall must be planned. For appliances with combustible refrigerant R-290 and a filling quantity of more than 150 g, a minimum space size as well as the permissible installation and installation conditions must be observed. A desired door stop on the right must be indicated when ordering. Optionally available are additional support rails, a roller set and a door stop for keeping open.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial blast chiller and blast freezer are currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: NUOVAIR, Via Padania 9/C, 31020 San Vendemiano (Treviso), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.