NordCap blast chiller / blast freezer C5.1 COMPACT-LINE, 4 x GN 1/1 or EN 600 x 400, 25 kg/cycle, 230 V

Product details

The NordCap C5.1 COMPACT-LINE cools or freezes 25 kg of food per cycle from +90 °C to 3 °C or -18 °C – with core temperature sensors and HACCP reading via app.

The C5.1 COMPACT-LINE is a multi-function device for quick cooling and shock frosting for GN 1/1 or EN 600 x 400 mm in the lateral insertion. Optionally, it accommodates 4 x GN 1/1-65 or EN 600 x 400, with special accessories up to 6 x GN 1/1-40 or up to 12 x GN 1/1-20 or EN 600 x 400, alternatively up to 6 ice bowls with 5.0 litres (330 x 165 x 120 mm). It processes 25 kg of product per cycle, from +90 to 3 °C for quick cooling and from +90 to -18 °C for shock frosting.The input temperature is up to +90 °C, the working temperature ranges from -35 to 3 °C.

The C5.1 COMPACT-LINE is operated via an electronic control system in the front panel with digital display in capacitive technology, the control board is protected according to protection class IP67 (DIN EN 60529). The modes Soft-Chilling, Hard-Chilling, Soft-Freezing and Hard-Freezing as well as 11 additional programs are available. The HACCP data can be read out via a smartphone app, a core temperature sensor with two measuring points belongs to the standard equipment.

Housing and interior are made of stainless steel CNS 1.4301, the plastic door frame. The interior has rounded corners and an integrated floor drain with stopper. The self-closing CNS full door with ergonomic handle has a tool-free interchangeable magnetic seal, the door stop is left and can be changed on the factory side without extra charge. Manual thawing is only done at the end of production, during the working cycles no defrosting is necessary, the dew water shell can be pulled out. The machine compartment is located below, its protective grille is removable for cleaning, cabling and components are easily accessible. The device is insulated with PUR hard foam up to 60 mm.

A bionic radial fan in protection class IP54 with fan stop after door opening, special channels for guiding the air flow into the evaporator as well as the plus system for air volume, speed and uniformity ensure the air flow. A thermostatic expansion valve and the XL evaporator surface with cathodic submersible coating support the rapid heat withdrawal. The cooling capacity is 2700 W at -10 °C evaporation temperature with R-290 (propane, 230 g), the climate class is 4. The connection is ready for plugging on 230 V with 1.65 kW and 7.5 A protection. Optionally available are additional support rails, a roller set (not for use with combi steamer) and a door stopper for keeping open.

• 1 x blast chiller / blast freezer C5.1 COMPACT-LINE
• 1 x connection cable
• 1 x frame frame, for GN 1/1 or EN 600 x 400
• 1 x core temperature sensor with two measuring points
• 4 x feet, height adjustable, H 55 to 60 mm
• 5 x support rails (per 2 pcs)

• Manufacturer item number: 4491000520
• Installation type: Stand-up equipment
• Recording (optional): 4 x GN 1/1-65 or EN 600 x 400; up to 6 x GN 1/1-40 or EN 600 x 400 or up to 12 x GN 1/1-20 or EN 600 x 400 with special accessories; up to 6 x ice bowl 5.0 l (330 x 165 x 120 mm); insert crosswise
• Power: 25 kg Product quantity per cycle (quick cooling +90 °C to 3 °C), 25 kg per cycle (shock frosts +90 °C to -18 °C)
• Temperature range Quick cooling: 90 to 3 °C (at 32 °C ambient temperature and 55 % relative humidity)
• Temperature range Shock frosts: 90 to -18 °C (at 32 °C ambient temperature and 55 % relative humidity)
• Working temperature: -35 to 3 °C
• Input temperature: up to +90 °C
• External dimensions (W x D x H): 800 x 813 x 925 mm
• Internal dimensions (W x D x H): 679 x 450 x 425 mm
• Depth with open door: 1567 mm
• Climate class: 4 (+30 °C ambient temperature, 55% relative humidity)
• Type of cooling: recirculated air cooling
• Fan: 1 x bionic radial fan, IP54, fan stop after door opening
• Expansion valve: thermostatic
• Refrigerant: R-290 (propane), filling quantity 230 g, GWP100 (AR5): 3
• Cooling capacity: 2700 W at -10 °C Evaporation temperature
• Control: electronic (in the front panel), digital display, capacitive technology, control board IP67, 11 additional programs
• Connection: ready to plug, 1.65 kW, 230 V, 1-phase, 50 Hz
• Hedging: 7,5 A
• Insulation: PUR hard foam, up to 60 mm
• exterior facing: CNS 1.4301, door frame made of plastic
• Internal facing: CNS 1.4301
• Weight: 115 kg net
• Country of origin: Italy

• Quick cooling and shock frosts with 25 kg each per cycle
• Soft-Chilling, Hard-Chilling, Soft-Freezing, Hard-Freezing and 11 additional programs
• HACCP data readable via smartphone app
• Core temperature sensor with two measuring points as standard
• Bionic radial fan with plus system and fan stop
• Defrosting only at the end of production, not during cycles
• XL evaporator surface with cathodic submersible coating
• Door stop without extra charge changeable on the factory side

Notes on establishment and operation

Ice bowls and GN sheets are not included. For ventilation and ventilation, a minimum distance of 40 mm from the sides and 50 mm from the rear wall must be planned. For equipment with combustible refrigerant R-290 and a filling quantity of more than 150 g, a minimum room size as well as the permissible installation and installation conditions must be observed. A desired door stop on the right must be indicated when ordering.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial blast chiller and blast freezer are currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: NUOVAIR, Via Padania 9/C, 31020 San Vendemiano (Treviso), Italy
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.